Manualshelf

ECIS4500 series Web Management Guide R02

ManualsBrandsEdgecore Networks ManualsEnterpriseIndustrial Gigabit Ethernet Switches
201202203204205206207208209210
Command Descriptions
205
sFlow sampling.
Object
Description
Agent Configuration
IP Address
The IP address used as Agent IP address in sFlow datagrams. It serves as a unique
key that will identify this agent over extended periods of time.
Both IPv4 and IPv6 addresses are supported.
Receiver Configuration
Owner
Basically, sFlow can be configured in two ways: Through local management using the
Web or CLI interface or through SNMP. This read-only field shows the owner of the
current sFlow configuration and assumes values as follows:
• If sFlow is currently unconfigured/unclaimed, Owner contains <none>.
• If sFlow is currently configured through Web or CLI, Owner contains <Configured
through local management>.
• If sFlow is currently configured through SNMP, Owner contains a string identifying
the sFlow receiver.
If sFlow is configured through SNMP, all controls - except for the Release-button - are
disabled to avoid inadvertent reconfiguration.