ECIS4500 series Web Management Guide R02

180
Otherwise the frame is classified to the default CoS.
The classified CoS can be overruled by a QCL entry.
Note: If the default CoS has been dynamically changed, then the actual default CoS
is shown in parentheses after the configured default CoS.
DPL
Controls the default drop precedence level.
All frames are classified to a drop precedence level.
If the port is VLAN aware and the frame is tagged, then the frame is classified to a
DPL that is equal to the DEI value in the tag. Otherwise the frame is classified to the
default DPL.
If the port is VLAN aware, the frame is tagged and Tag Class. is enabled, then the
frame is classified to a DPL that is mapped from the PCP and DEI value in the tag.
Otherwise the frame is classified to the default DPL.
The classified DPL can be overruled by a QCL entry.
PCP
Controls the default PCP value.
All frames are classified to a PCP value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to the
PCP value in the tag. Otherwise the frame is classified to the default PCP value.
DEI
Controls the default DEI value.
All frames are classified to a DEI value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to the
DEI value in the tag. Otherwise the frame is classified to the default DEI value.
Tag Class.
Shows the classification mode for tagged frames on this port.
Disabled: Use default CoS and DPL for tagged frames.
Enabled: Use mapped versions of PCP and DEI for tagged frames.
Click on the mode in order to configure the mode and/or mapping.
Note: This setting has no effect if the port is VLAN unaware. Tagged frames received
on VLAN unaware ports are always classified to the default CoS and DPL.
DSCP Based
Click to Enable DSCP Based QoS Ingress Port Classification.