ECIS4500 series Web Management Guide R02

Command Descriptions
105
only if more than one server has been configured.
Key
The secret key - up to 63 characters long - shared between the RADIUS server
and the switch.
NAS-IP-Address(Attribute
4)
The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. If
this field is left blank, the IP address of the outgoing interface is used.
NAS-IPv6-Address(Attribute
95)
The IPv6 address to be used as attribute 95 in RADIUS Access-Request packets.
If this field is left blank, the IP address of the outgoing interface is used.
NAS-Identifier (Attribute 32)
The identifier - up to 253 characters long - to be used as attribute 32 in RADIUS
Access-Request packets. If this field is left blank, the NAS-Identifier is not included
in the packet.
Server Configuration
Delete
To delete a RADIUS server entry, check this box. The entry will be deleted during
the next Save.
Hostname
The IP address or hostname of the RADIUS server.
Auth Port
The UDP port to use on the RADIUS server for authentication.
Acct Port
The UDP port to use on the RADIUS server for accounting.
Timeout
This optional setting overrides the global timeout value. Leaving it blank will use
the global timeout value.
Retransmit
This optional setting overrides the global retransmit value. Leaving it blank will use
the global retransmit value.
Key
This optional setting overrides the global key. Leaving it blank will use the global
key.
Buttons
Click to add a new RADIUS server, up to 5 servers are supported.
The button can be used to undo the addition of the new server.
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.