ECIS4500 Series CLI Reference Guide R02

58
3.8.2 sflow agent-ip
Description
The agent IP address used as agent-address in UDP datagrams. Defaults
to IPv4 loopback address.
Syntax
sflow agent-ip { ipv4 <ipv4_addr> | ipv6 <ipv6_addr> }
Parameter
Name
Description
< ipv4_addr >
Ipv4 address
< ipv6_addr>
ipv6 address
3.8.3 sflow collector-address
Description
Sflow runtime, see sflow_icli_functions
Syntax
sflow collector-address [ receiver <range_list> ] [ <word> ]
Parameter
Name
Description
< range_list >
Sampler instance
3.8.4 sflow max-datagram-size
Description
Statistics flow Maximum datagram size.
Syntax
sflow max-datagram-size [ receiver <range_list> ] <200-1468>
Parameter
Name
Description
<range_list>
receiver list
<200-1468>
packet byte
3.8.5 sflow max-sampling-size
Description
Specifies the maximum number of bytes to transmit per flow sample.
Syntax
sflow max-sampling-size [ sampler <range_list> ] [ <14-200> ]
Parameter
Name
Description
< range_list >
Sampler instance
<200-1468>
packet byte
3.8.6 sflow collector-port
Description
Collector UDP port
Syntax
sflow collector-port [ receiver <rcvr_idx_list> ] <collector_port>
Parameter
Name
Description
collector_port
<Collector Port : 1-65535> Port number
3.8.7 sflow sampling-rate
Description
Specifies the statistical sampling rate. The sample rate is specified as N
to sample 1/Nth of the packets n the monitored flows. There are no
restrictions on the value, but the switch will adjust it to the closest
possible sampling rate.
Syntax
sflow sampling-rate [ sampler <range_list> ] [ <1-4294967295> ]
Parameter
Name
Description
< range_list >
Sampler instance
<1-4294967295>
Sampling rate