ECIS4500 series Web Management Guide R02

2.3.28 SNMP Trap Configuration

Configure SNMP trap on this page.

Object

Description

Global Settings

Mode

Indicates the trap mode operation. Possible modes are:

Enabled: Enable SNMP trap mode operation.

Disabled: Disable SNMP trap mode operation.

Trap Destination Configurations

Name

Indicates the trap Configuration's name. Indicates the trap destination's name.

Enable

Indicates the trap destination mode operation. Possible modes are:

Enabled: Enable SNMP trap mode operation.

Disabled: Disable SNMP trap mode operation.

Version

Indicates the SNMP trap supported version. Possible versions are:

SNMPv1: Set SNMP trap supported version 1.

SNMPv2c: Set SNMP trap supported version 2c.

SNMPv3: Set SNMP trap supported version 3.

Destination Address

Indicates the SNMP trap destination address. It allow a valid IP address in dotted

decimal notation ('x.y.z.w').

And it also allow a valid hostname. A valid hostname is a string drawn from the

alphabet (A-Za-z), digits (0-9), dot (.), dash (-). Spaces are not allowed, the first

character must be an alpha character, and the first and last characters must not be a

dot or a dash.