ECIS4500 series Web Management Guide R02

Command Descriptions
145
2.3.80 LLDP
2.3.81 LLDP
This page allows the user to inspect and configure the current LLDP port settings.
Object
Description
LLDP Parameters
Tx Interval
The switch periodically transmits LLDP frames to its neighbors for having the network
discovery information up-to-date. The interval between each LLDP frame is
determined by the Tx Interval value. Valid values are restricted to 5 - 32768 seconds.
Tx Hold
Each LLDP frame contains information about how long the information in the LLDP
frame shall be considered valid. The LLDP information valid period is set to Tx Hold
multiplied by Tx Interval seconds. Valid values are restricted to 2 - 10 times.
Tx Delay
If some configuration is changed (e.g. the IP address) a new LLDP frame is
transmitted, but the time between the LLDP frames will always be at least the value
of Tx Delay seconds. Tx Delay cannot be larger than 1/4 of the Tx Interval value.