ECIS4500 Quick Start Guide R01

ECIS4500 Quick Installation Guide

Connecting Power Terminal Block

The switch can be powered from two power supplies (input range 12V – 58V). Insert the

positive and negative wires into V+ and V- contacts on the terminal block respectively and

tighten the wire-clamp screws to prevent the wires from being loosened.

Note: 1. The DC power should be connected to a well-fused power supply.

ECIS4500-6T4F/6T2F/8T2F

ECIS4500-8P2T4F/8P4F/4P2T2F/4P4F

First Power Supply

Second Power Supply

First Power Supply

Second Power Supply