ECIS4500 Quick Start Guide R01

ECIS4500 Quick Installation Guide

Safety Instructions

Overview

When a fiber connection is removed during installation, testing, servicing or an active fiber is broken,

ocular exposure to optical energy may be potentially hazardous, depending on the laser output

power.

The primary hazards of exposing laser radiation from an optical-fiber communication systems are:

●

Damage to eyes from accidental exposure to a beam emitted by a laser source.

●

Damage to eyes from viewing the connector that attaches to a broken fiber or an energized fiber.

Technical Specifications

Model ECIS4500 Series Industrial Switch

Ethernet Copper RJ-45 Ports 10/100/1000 Mbps speed auto- negotiation MDI/MDIX Auto-crossover

SFP (pluggable Ports) 100/1000BASE SFP slot

Fiber port connector LC typically for fiber (depends on module)

Power

ECIS4500-6T2F ECIS4500-4P4T

ECIS4500-8T2F ECIS4500-4P2T2F

ECIS4500-6T4F ECIS4500-8P4F

ECIS4500-8P2T4F

Power input Redundant input terminals; reverse power protection

Input voltage range 12-58 VDC 12-58 VDC (with PoE: 46-58 VDC)

Maximum Power consumption 17 Watts

Without PoE: 14 Watts,

With PoE: 265 Watts

Environmental and Compliances

Operating temperature -40 to +75°C (cold startup at -40°C)

Storage temperature -40 to +85°C

Humidity 5 to 95% RH (non-condensing)

Mechanical

Ingress protection IP30

Dimension

(without DIN rail clip)

154mm (H) x 109mm (D) x 60mm (W) 154mm (H) x 128mm (D) x 77mm (W)

Weight 1056 g 1410 g

Installation option DIN-rail and wall mounting