Datasheet

Data Center Switch
AS9716-32D
The Edgecore DCS510 is spine switch for high-performance data centers. The switch provides line-rate L2 and L3
switching across the 32 x QSFP-DD ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 4 x
100 GbE or 4 x 25 GbE. The DCS510 can be deployed as a spine switch supporting 100/400 GbE spine interconnects.
This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the
installation of compatible Network Operating System soſtware, including the open source options, plus
commercial NOS offerings.
Cost-effective, open network switch for data center fabric.
32 x QSFP-DD switch ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 4 x 100 GbE or
4 x 25 GbE.
Incorporates Broadcom Tomahawk III switch series silicon for non-blocking line-rate performance.
1 RU form factor.
Supports hot/cold aisles with front-to-back and back-to-front airflow SKUs.
All ports on front; PSUs and fans accessible from rear.
Hot-swappable, load-sharing, redundant 1300 W PSUs.
5+1 redundant, hot-swappable fan modules.
Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of
compatible open source and commerical NOS offerings.
DCS510 Data Center Switch
Key Features and Benefits

Summary of content (4 pages)