Datasheet

Data Center Switch
AS7816-64X
The Edgecore DCS500 is a Top-of-Rack (TOR) or spine switch for high-performance data centers. The switch
provides line-rate L2 and L3 switching across the 64 x QSFP28 ports, each supporting 1 x 100 GbE or 1x 40 GbE, or
via breakout cables 4 x 25 GbE or 4 x 10 GbE. The DCS500 can be deployed as a TOR switch supporting 10/25 GbE
to servers with 40/100 GbE uplinks, or as a spine switch supporting 40/100 GbE spine interconnects. This open
network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of
compatible Network Operating System (NOS) soſtware, including the open source plus commercial NOS offerings.
■ Cost-effective, open network switch for data center fabric.
■ 64 x QSFP28 switch ports, each supporting 1 x 100 GbE or 1 x 40 GbE, or via breakout cables 4 x 25 GbE or
4 x 10 GbE.
■ Incorporates Broadcom StrataXGS Tomahawk II switch series silicon for non-blocking line rate performance.
■ High performance Intel Xeon D-1518 CPU with optional BMC.
■ 2 RU form factor.
■ Supports hot/cold aisles with front-to-back and back-to-front airflow SKUs.
■ All ports on front; PSUs and fans accessible from rear.
■ Hot-swappable, load-sharing, redundant 850 W PSUs.
■ 3+1 redundant, hot-swappable fan modules.
■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of
compatible open source and commerical NOS offerings.
DCS500 Data Center Switch
Key Features and Benefits