Datasheet
Data Center Switch
AS9726-32DB
The Edgecore DCS240 is spine switch for high-performance data centers. The switch provides line-rate L2 and L3
switching across the 32 x QSFP56-DD ports, each supporting 1 x 400 GbE or 1 x 100 GbE, or via breakout cables 2
x 200GbE, 4 x 100 GbE, or 4 x 25 GbE. The DCS240 can be deployed as a spine switch supporting 100/400 GbE spine
interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which
supports the installation of compatible Network Operating System soſtware, including the open source options,
plus commercial NOS offerings.
■ Cost-effective, open network switch for data center fabric.
■ QSFP56-DD switch ports, each supporting 1 x 400 GbE, or via breakout cables 2 x 200G GbE or 4 x 100 GbE.
Upper 16 ports support up to 24 W per transceiver.
Lower 16 ports support up to 14 W per transceiver.
■ Incorporates Broadcom Trident 4 switch series silicon for non-blocking line-rate performance.
■ 1 RU form factor.
■ Supports hot/cold aisles with front-to-back and back-to-front airflow SKUs.
■ All ports on front; PSUs and fans accessible from rear.
■ Hot-swappable, load-sharing, redundant 1500 W PSUs.
■ 5+1 redundant, hot-swappable fan modules.
■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of
compatible open source and commerical NOS offerings.
DCS240 Data Center Switch
Key Features and Benefits