Datasheet

Soſtware
■ Switch is loaded with Open Network Install Environment (ONIE)
soſtware installer
■ Compatible with the following NOS options: open source
options, plus commercial NOS offerings.
Regulatory
■ EMI:
CE Mark
EN55032 Class A
EN55024
EN61000-3-2
EN61000-3-3
FCC Title 47, Part 15, Subpart B Class A
VCCI Class A
CCC
BSMI
■ Safety:
CB
UL/CUL
CCC
BSMI
■ Environmental:
NEBS GR63-CORE (Pre-test)
■ RoHS 2.0 Compliant
■ Country of Origin: Taiwan (TAA Compliant)
■ The switch complied with the following WEEE standards:
Waste Electrical and Electronic Equipment (WEEE Directive
2002/9A6/EC)
Warranty
Please check www.edge-core.com for the warranty terms in your
country.
For More Information
To find out more about Edgecore Networks Corporation products
and solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing
innovative network solutions. In the service provider network, in the
data center or in the cloud, Edgecore Networks Corporation delivers
the soſtware and systems that transform the way the world
connects. Edgecore Networks Corporation serves customers and
partners worldwide. Additional information can be found at
www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton
Technology Corporation, the leading network ODM company. The
Edgecore data center switches are developed and manufactured by
Accton.
To purchase Edgecore Networks solutions, please contact your
Edgecore Networks Corporation representatives at [phone]
(HQ) or [phone] or authorized resellers.
© Copyright 2022 Edgecore Networks Corporation. The information contained herein
is subject to change without notice. This document is for informational purposes only
and does not set forth any warranty, expressed or implied, concerning any
equipment, equipment feature, or service offered by Edgecore Networks Corporation.
Edgecore Networks Corporation shall not be liable for technical or editorial errors or
omissions contained herein.
Ports
■ Switch Ports:
48 x 25 GbE SFP28 plus 8 x 100 GbE QSFP28 ports:
• Each SFP28 supports 1 x 1 GbE (fixed speed, no Auto-negotiation)
or 10GbE or 25 GbE single rate transceivers, AOC, and DAC
• RJ-45 transceivers are supported with H/W version R01G or
newer
• Each QSFP28 supports 1 x 40/100 GbE or 4 x 25 GbE or 4 x 10 GbE
per port using breakout cables
Note: When a DAC cable is used in a topology, a link issue may be
encountered if the CR4 Auto-Negotiation/Link Training does not turn
on. This can be solved by manually enabling CR4 Auto Negotiation/Link
Training.
■ Management Ports on Port Side:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage
Key Componets
■ Switch Silicon: Broadcom BCM56873 Trident III 2.0 Tbps
No PHYs
■ CPU Modules:
Intel® Xeon® D-1518 processor quad-core 2.2 GHz
DDR4: SO-DIMM 8 GB x 2
SPI Flash: 16 MB x2
m.2 SSD: 64 GB MLC
Performance
■ Switching Capacity: 4 Tbps full duplex
■ Forwarding Rate: 2 Bpps
■ Jumbo frames support up to 9K Bytes
■ Packet Buffer Size: 32 MB integrated packet buffer
■ MAC Addresses: 32 K min./288 K max.
■ VLAN IDs: 4 K
■ IPv4: 16 K min./168 K max. host entries; 32 K LPM entries with
TCAM-only mode
■ IPv6: 8K min/100 K max. host entries; IPv6/128= 8 K TCAM-only
mode
Physical and Environmental
■ Dimensions (WxDxH): 43.84 x 53.6 x 4.35 cm (17.26 x 21.1 x 1.71 in.)
■ Weight: 10 kg (22.05 lb), with two installed PSUs
■ Operating Temperature:
F2B Operating: 0°C to 45°C (32° F to 113° F)
B2F Operating: 0°C to 40°C (32° F to 104° F)
■ Storage Temperature: -40°C to 70°C (-40°F to 158°F)
■ Operating Humidity: 5% to 95% non-condensing
LEDs
■ SFP28 Port LEDs: Link Status, Activity, Rate
■ QSFP28 Port LEDs: Link Status, Activity, Rate
■ Ethernet Management Port LED: Link Status, Activity
■ System LEDs: Diagnostic, Locator, PSU and Fan Status
Power
■ PSUs: 2 redundant, load-sharing, hot-swappable AC or -48 VDC
■ AC input range: 100–240 VAC
■ DC input range: -36~-72 VDC
■ Redundant, current sharing, PG
DCS203 Data Center Switch