Datasheet

Regulatory Compliance
■ Safety Compatibility
EN 62368-1:2014 + AC:2015
IEC 62368-1:2014
■ Electromagnetic Compatibility
EN 300 386 V1.6.1 (2012–09)
■ Installation environment: telecommunication center
■ ITU-T K.80:07/2009
■ FCC 47 CFR Part 15, Subpart B, Class A
■ EN 301 489-1 V2.1.1
■ EN 301 489-19 V2.1.0
■ EN 303 413 V1.1.1
■ Radio Equipment Directive 2014/53/EU
Environmental
■ Usage altitude 60 m below sea level (106 kPa air pressure) to 3000 m
(70 kPa)
■ Storage:
IEC60068-2-14
Temperature: -40°C to +70°C
■ Transportation: ETSI EN 300 019-1-2 Class 2.3
Temperature: -40°C to +70°C (-40°F to +158°F)
Operating Conditions: [ETSI EN 300 019-1-3] Class 3.2
Temperature range: -40°C to +65°C (-40°F to 149°F)
Relative humidity: 5% to 95%
■ The product complies with the current version of the following EU
directives:
RoHS
WEEE
REACH
Warranty
Please check www.edge-core.com for the warranty terms in your country.
For More Information
To find out more about Edgecore Networks Corporation products and
solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing innovative
network solutions. In the service provider network, in the data center or in
the cloud, Edgecore Networks Corporation delivers the soſtware and
systems that transform the way the world connects. Edgecore Networks
Corporation serves customers and partners worldwide. Additional
information can be found at www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton Technology
Corporation, the leading network ODM company. The Edgecore data center
switches are developed and manufactured by Accton.
To purchase Edgecore Networks solutions, please contact your Edgecore
Networks Corporation representatives at [phone] (HQ) or +1
(949)-336-6801 or authorized resellers.
© Copyright 2022 Edgecore Networks Corporation. The information contained herein is subject to
change without notice. This document is for informational purposes only and does not set forth
any warranty, expressed or implied, concerning any equipment, equipment feature, or service
offered by Edgecore Networks Corporation. Edgecore Networks Corporation shall not be liable for
technical or editorial errors or omissions contained herein.
Ports
■ Switch Ports
20 x SFP+ (each supporting 10 GbE or 1 GbE)
4 x SFP28 (each supporting 1GbE, 10 GbE or 25 GbE)
3 x 100G QSFP28 (each supporting 1 x 40/100 GbE or 4 x 10/25 GbE or
2 x 50 GbE)
■ Management Ports on Front Panel
1 x RJ-45 serial console
1 x RJ-45 1000BASE-T management Ethernet port (MGMT)
1 x USB
1 alarm I/O
■ Clocking and Timing ports
Station Clock Input and Output ports
PRTC: ITU-T G.8272
Pulse-per-Second (PPS) input and output
Time-of-Day (TOD) input
Integrated GNSS receiver
■ Stacking Interface
2 out of 3 100G QSFP28 can be used for stacking
1 x 1 GbE from CPU(control signal)
1 x RJ45 for sync signals
Optics and cables for stacking:
QSFP28 DAC up to 2 m
QSFP28 AOC up to 30 m
Key Components
■ Switch Silicon: Broadcom BCM88470 Qumran-AX
■ CPU module:
Processor: Intel® Denverton C3508 4 core
Memory: 16G RAM DDR4-2400
■ Stratum 3E compliant oscillator (OCXO)
■ SSD M.2, 32 Gbytes
Performance
■ 300 Gbps bidirectional switching capacity
■ 300 Mpps packet processing rate
■ Scales to 600 Gbps per node in stacked configuration
(2 x CSR310)
Physical and Environmental
■ Dimensions (WxDxH): 440 x 300 x 44 mm (17.32 x 11.81 x 1.73 in)
■ Weight 5.35 kg (11.79 lb), with two installed PSUs
■ Installations to standard 19”, 21”, 23”, and ETSI 600 mm racks or
cabinets as well as OCP 21” open racks
PSU
■ DC Input : 36V -72V, 10 A
■ AC Input : 100V-240V, 5 A
■ Power Consumption :250 W( Maximum)
Soſtware
■ Switch is loaded with Open Network Install Environment (ONIE)
■ Compatible with the following NOS options: Open Network Linux (ONL)
CSR310 Cell Site Router