Datasheet

ManualsBrandsEdgecore Networks ManualsCore Routers9.6T Fabric Router

Core Router

AS9926-24D/AS9926-24DB

COR580 Core Router

The Edgecore COR580 is a high-performance fabric switch for carrier, data center, or transport networking

applications. The switch is a 1RU form factor with Broadcom StrataDNX family SoC silicon and consists of 24 x

400GE QSFP-DD Fabric Interfaces (FIF).

Interconnected with the Edgecore COR550 (Jericho2 Leaf), the COR580 can be deployed in a spine and leaf

architecture supporting a maximum 24 COR550 leaf interconnections, which forms a complete solution and

enables you to build scalable and ﬂexible core network infrastructures providing a total 96 Tbps of bandwidth for

routing, packet processing, and eﬃcient traﬃc management.

The COR580 open network fabric switch is loaded with the Open Network Install Environment (ONIE), which

supports the installation of compatible Network Operating System (NOS) soﬅware, including the open source

options Open Network Linux, plus commercial NOS oﬀerings.

■ Powerful, ﬂexible and scalable fabric switch for carrier core router applications

■ 24 x QSFP-DD cell-base fabric ports

■ PAM4/50GE and NRZ/25GE conﬁgurations, allowing interconnections to J+/J2C devices

■ Broadcom StrataDNX™ series Ramon silicon for high-scale capacity and traﬃc management

■ Self-routing with dynamic load balancing

■ Support for single-stage and three-stage fabric conﬁgurations

■ Supports fabric multicast and multicast load balancing

■ Support for three pipes with ﬂexible allocation, e.g., TDM/OTN - unicast data - multicast data

■ High-performance Intel® Xeon® Broadwell-DE, 8 core CPU with integrated BMC (AS9926-24DB)

■ Supports hot/cold aisles with front-to-back airﬂow SKUs

■ Hot-swappable, load-sharing, 1+1 redundant DC-DC/AC-DC PSUs

■ 5+1 redundant, hot-swappable fan modules

■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of

compatible open source and commerical NOS oﬀerings.

Applications

■ Carrier Ethernet core, metro/edge switches, and routers

■ Data center switch/router

■ Packet transport switch

■ Mobile backhaul

■ Enterprise switch and router

Key Features and Beneﬁts

Summary of content (4 pages)

PAGE 1
COR580 Core Router Core Router AS9926-24D/AS9926-24DB The Edgecore COR580 is a high-performance fabric switch for carrier, data center, or transport networking applications. The switch is a 1RU form factor with Broadcom StrataDNX family SoC silicon and consists of 24 x 400GE QSFP-DD Fabric Interfaces (FIF).
PAGE 2
COR580 Core Router Free Soﬅware Included Interfaces 1 2 3 4 8 11 12 5 6 9 10 11 Description 1. System LEDs 7. USB storage type 2.0 2. Dual 7-segment LED 8. Reset button 3. 400G QSFP-DD 9. Out-of-band port 1 4. Micro USB console port 10. RJ-45 console port 5. Out-of-band port 0 11. 1+1 redundant PSUs 6. RJ-45 management port 12.
PAGE 3
COR580 Core Router Ports ■ Switch Ports: 24 x 400 GbE QSFP-DD Supports standard 25GE, 50GE conﬁgurations by breakout to 2 x 200GE, 4 x 100GE and 100GE ■ Management ports: 1 x RJ-45 serial console 1 x RJ-45 10/100/1000BASE-T management 2 x OOB SFP+ 10G 1 x Type-A USB 2.0 port 1 x Micro USB console Key Components ■ Switch Silicon: Broadcom BCM88795 (Ramon) ■ CPU Module: Intel® Xeon® Broadwell-DE 8 core 2.0 GHz SDRAM DDR4 SO-DIMM 32 GB (16 GB x 2) SPI Boot Flash Redundant (2 x 16 MB) SSD: M.
PAGE 4
COR580 Core Router Ordering Information Base model: AS9926-24D; Intel® Xeon® D-1548 8C, 24 x 400 GbE QSFP-DD ﬁxed ports. ONIE soﬅware installer. Model Number Part Number PSU Airﬂow Region (power cord) AS9926-24D-O-AC-F FP5EC9524000Z Modular Dual AC PSUs Front to Back Airﬂow without power cord AS9926-24D-O-AC-F-US FP5EC9524400Z Modular Dual AC PSUs Front to Back Airﬂow N.