Datasheet

ManualsBrandsEdgecore Networks ManualsFixed Broadband AccessXGS-PON VIRTUAL OPTICAL LINE TERMINAL

Open Architecture XGS-PON OLT

ASXvOLT16

The ASXvOLT16 is a 16-10G-port XGS-PON virtual Optical Line Terminal (vOLT) with 4 x 100G/40G QSFP28 ﬁxed

ports. The 10G ports, 100G uplink ports, and console/management USB ports are all on the front panel. All 10G

ports operate at wire-speed by default and support standard XGS-PON transceivers. The QSFP28 ports support

100G and 40G operation modes, as well as being conﬁgurable as 4 x 25GbE or 4 x10 GbE modes using DAC breakout

cables. This vOLT supports redundant hot-swappable PSUs and fans, and is available with a front-to-back or

back-to-front airﬂow direction. This open network switch is loaded with the Open Network Install Environment

(ONIE), which supports the installation of compatible Network Operating System (NOS) soﬅware, including the

open source plus commercial NOS oﬀerings.

■ Cost-eﬀective hardware for communication service providers.

■ 4 x QSFP28 switch ports, each supporting 1 x 100 GbE or 1 x 40 GbE, or via breakout cables 2 x 50 GbE,

4 x 25 GbE, or 4 x 10 GbE.

■ Layer 2 or Layer 3 forwarding at 300 Gbps (full duplex).

■ Supports hot/cold aisles with front-to-back airﬂow SKU.

■ All ports on front; PSUs and fans accessible from rear.

■ Hot-swappable, load-sharing, redundant AC or -48V DC PSUs.

■ 5+1 redundant, hot-swappable fan modules.

■ Handles the abstraction between the protocol and the native hardware RPC.

■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of

compatible open source and commerical NOS oﬀerings.

ASXvOLT16 Open Architecture XGS-PON OLT

Key Features and Beneﬁts

Summary of content (4 pages)

PAGE 1
ASXvOLT16 Open Architecture XGS-PON OLT Open Architecture XGS-PON OLT ASXvOLT16 The ASXvOLT16 is a 16-10G-port XGS-PON virtual Optical Line Terminal (vOLT) with 4 x 100G/40G QSFP28 ﬁxed ports. The 10G ports, 100G uplink ports, and console/management USB ports are all on the front panel. All 10G ports operate at wire-speed by default and support standard XGS-PON transceivers.
PAGE 2
ASXvOLT16 Open Architecture XGS-PON OLT Free Soﬅware Included Interfaces 1 2 3 4 5 6 7 8 Description 1. 1 x RJ-45 console port 5. 4 x 40/100G QSFP28 ports 2. 1 x USB2.0 Type A storage port 6. PSU2 3. 16 x XFP XGS-PON ports 7. Hot-Swappable 5+1 redundant fans 4.. 1 x RJ-45 management port 8.
PAGE 3
ASXvOLT16 Open Architecture XGS-PON OLT Ports ■ Switch Ports: 16 x XGS-PON ports 4 x QSFP28 100 GbE ■ Management ports on port side: 1 x RJ-45 serial console 1 x RJ-45 100/1000BASE-T management 1 x USB Type A storage Soﬅware ■ Switch is loaded with Open Network Install Environment (ONIE) soﬅware installer ■ Compatible with the following NOS options: open source options, plus commercial NOS oﬀerings. Warranty Please check www.edge-core.com for the warranty terms in your country.
PAGE 4
ASXvOLT16 Open Architecture XGS-PON OLT Ordering Information Base model: ASXvOLT16; Intel® Xeon® D-1518 Processor, 16 x XGS-PON ports, 4 x 100 GbE QSFP28 ports; ONIE soﬅware installer. Model Number Part Number PSU Airﬂow Region (power cord) ASXvOLT16-O-48V-F FN1EC0816404Z Dual 48 VDC PSUs Port-to-Power airﬂow NA ASXvOLT16-O-AC-F FN1EC0816003Z Dual AC PSUs Port-to-Power airﬂow NA ASXvOLT16-O-AC-F-US FN1EC0816405Z Dual AC PSUs Port-to-Power airﬂow N.