Quick Start Guide R01

Quick Start Guide
– 3 –
Connect the Timing Port
Make Management Connections
2. QSFP28 slots
First install QSFP28 transceivers and then connect fiber optic cabling
to the transceiver ports.
3. SFP28 slots
First install SFP28 transceivers and then connect fiber optic cabling to
the transceiver ports.
6
1PPS port
Use a coax cable to connect the 1-pulse-per-second (1PPS) SMB port
to another synchronized device.
7
1. SFP/RJ-45 slots
Combo RJ-45/SFP Ethernet out-of-band (OOB) management port to
provide a network management connection.
2. RJ-45 Console port
Connect the included console cable and then configure the serial
connection: 115200 bps, 8 characters, no parity, one stop bit, 8 data
bits, and no flow control.
3. USB port
Connect using a standard USB cable to a storage device.
Hardware Specifications
Chassis
Size (WxDxH) 477 x 600 x 89 mm (18.78 x 23.62 x 3.50 in)
Weight 16.51 kg (36.40 lbs)
Temperature Operating: 0° C to 40° C (32° F to 104° F)
Storage: -40° C to 70° C (-40° F to 158° F)
Humidity Operating: 5% to 95% (non-condensing)
System Input Rating
AC Input 100-240 Vac, 50-60 Hz, 5.5-2.3 A
DC Input -36 – -72 Vdc, 16-8 A
Power
Consumption
480 W
Regulatory Compliances
Emissions EN 55032:2015+AC:2016, Class A
EN 61000-3-2:2014, Class A
EN 61000-3-3:2013
FCC Class A
Immunity IEC 61000-4-2/3/4/5/6/8/11
EN 55024:2010+A1:2015
EN 55035:2017
Safety UL (UL 62368-1 & CSA C22.2 No. 62368-14
CB (IEC/EN 60950-1, IEC/EN 62368-1)