Datasheet

Open Architecture GPON OLT
ASGvOLT64
The ASGvOLT64 is an open GPON OLT featuring 64 GPON ports with 8 x 10/25G SFP28, and 2 x 40G/100G QSFP28
fixed ports. The OLT complies with the ITU-T G.984 GPON standard. The GPON ports, SFP28/QSFP28 uplink ports,
and console/management USB ports are all on the front panel. All GPON ports operate at wire-speed by default
and support standard GPON transceivers. The QSFP28 ports support 100G and 40G operation modes, as well as
being configurable as 4 x 25 GbE or 4 x10 GbE modes using DAC breakout cables. This disaggregated OLT supports
redundant hot-swappable PSUs and fans, and is available with front-to-back, and back-to-front airflow design.
This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the
installation of compatible Network Operating System (NOS) soſtware, including the open source plus commercial
NOS offerings.
High capacity 64 port GPON OLT for next generation open and disaggregated access network architecture.
2 x QSFP28 switch ports, each supporting 1 x 100 GbE or 1 x 40 GbE, or via breakout cables 2 x 50 GbE,
4 x 25 GbE, or 4 x 10 GbE.
Layer 2 or Layer 3 forwarding at 300 Gbps (full duplex).
Supports front-to-back airflow SKU.
All ports on front; PSUs and fans accessible from rear.
Hot-swappable, load-sharing, and redundant AC or DC PSUs.
3+1 redundant, hot-swappable fan modules.
Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of
compatible open source and commerical NOS offerings.
ASGvOLT64 Open Architecture GPON OLT
Key Features and Benefits

Summary of content (4 pages)