Datasheet

Regulatory Compliance
EMI
CE Mark
EN55032 Class A
EN55024
EN61000-3-2
EN61000-3-3
FCC Part 15 Subpart B Class A
VCCI Class A
Safety
CB
UL/CUL
Environmental:
Temperature: IEC 68-2-14
Vibration: IEC 68-2-36, IEC 68-2-6
Shock: IEC 68-2-29
Drop: ISTA 2A
RoHS 2.0 Compliant
Warranty
Please check www.edge-core.com for the warranty terms in your country.
For More Information
To find out more about Edgecore Networks Corporation products and
solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing innovative
network solutions. In the service provider network, in the data center or in
the cloud, Edgecore Networks Corporation delivers the soſtware and
systems that transform the way the world connects. Edgecore Networks
Corporation serves customers and partners worldwide. Additional
information can be found at www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton Technology
Corporation, the leading network ODM company. The Edgecore data center
switches are developed and manufactured by Accton.
To purchase Edgecore Networks solutions, please contact your Edgecore
Networks Corporation representatives at +886 3 563 8888 (HQ) or +1
(949)-336-6801 or authorized resellers.
© Copyright 2021 Edgecore Networks Corporation. The information contained herein is subject to
change without notice. This document is for informational purposes only and does not set forth
any warranty, expressed or implied, concerning any equipment, equipment feature, or service
offered by Edgecore Networks Corporation. Edgecore Networks Corporation shall not be liable for
technical or editorial errors or omissions contained herein.
Ports
Switch ports:
16 x QSFP28 ports. Each Port supports 1 x 40/100 GbE
8 line-card slots for QSFP28, DCO modules
Management ports on port side:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage
Key Components
Switch Silicon: Broadcom BCM56965 Tomahawk+
CPU Modules:
Intel® Xeon® D-1518 quad-core x86 Processor
DDR4: SO-DIMM 8 GB x 2
SPI Flash: 16MB
m.2 SSD: 32 GB MLC
Performance
Switching Capacity: 6.4 Tbps full duplex
Jumbo frames support up to 9216 Bytes
Subject to NOS:
MAC Addresses: 8 K min./136 K max.
VLAN IDs: 4 K
IPv4: 8 K min./84 K max. host entries; 16 K LPM entries with
TCAM-only mode
IPv6: 4 K min /36 K max. host entries; IPv6/64= 8 K TCAM-only mode
Physical and Environmental
Dimensions (WxDxH): 44.25 x 55.0 x 6.6 cm (17.42 x 21.65 x 2.6 in.)
Operating Temperature: 0°C to 45°C (32°F to 113°F)
Storage Temperature: -40° C to 70° C (-40° F to 158° F)
Operating Humidity: 5% to 95% (non-condensing)
Soſtware
Switch is loaded with Open Network Install Environment (ONIE)
soſtware installer
Compatible with the following NOS options: open source options, plus
commercial NOS offerings.
LEDs
QSFP28 Port LEDs: Link Status, Activity, Speed
Ethernet Management Port LED: Link Status, Activity
System LEDs: Diagnostic, Locator, PSU and Fan Status
Modules LED: Link Status, Activity, Speed
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC
Input Voltage: 90 to 240 VAC at 50-60 Hz.
PSU Efficiency: Up to 93% for AC PSUs
Full loading, the total power consumption is approximately 1100 W.
1. Under the operation of full loading, the system of AS7716-24SC can
support 1 PSU operation if the VAC is set up at high line mode.
2. It’s necessary to use 2 PSUs when the VAC is configured at low line
mode.
Weight AS7716-24SC DCO QSFP28
Net Weight 11.6 kg 0.372 kg 0.322 kg
AS7716-24SC
100GbE Coherent Switch
t6