AS5800-EC Series CLI Reference Guide R02

Chapter 22 | Data Center Bridging Commands
Priority-based Flow Control Commands
– 544 –
Default Setting
None
Command Mode
Privileged Exec
Example
This example clears PFC statistics on all interfaces.
Console#clear pfc statistics
Console#
show pfc Use this command to show PFC configuration settings.
Syntax
show pfc [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-54)
port-channel channel-id (Range: 1-27)
Command Mode
Privileged Exec
Example
This example displays the PFC administrative status, operational mode, and the
priority bits for frames to pause (instead of drop) when congestion occurs in the
specified priority buffers.
Console#show pfc interface ethernet 1/5
Interface Admin Oper Admin Oper
Mode Mode Enabled Pri Enabled Pri
--------- -------- -------- --------------- ---------------
Eth 1/ 5 Auto Enabled 3 3
Console#