AS5800-EC Series CLI Reference Guide R02

Chapter 8 | Authentication Commands
Web Server
– 222 –
Command Mode
Global Configuration
Example
Console(config)#ip http port 769
Console(config)#
Related Commands
ip http server (222)
show system (122)
ip http server This command allows this device to be monitored or configured from a browser.
Use the no form to disable this function.
Syntax
[no] ip http server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#ip http server
Console(config)#
Related Commands
ip http port (221)
show system (122)
ip http secure-port This command specifies the UDP port number used for HTTPS connection to the
switch’s web interface. Use the no form to restore the default port.
Syntax
ip http secure-port port-number
no ip http secure-port
port-number – The TCP port used for HTTPS. (Range: 1-65535, except for the
following reserved ports: 1 and 25 - Linux kernel, 23 - Telnet, 80 - HTTP)
Default Setting
443