AS5800-EC Series CLI Reference Guide R02

Chapter 6 | SNMP Commands
Additional Trap Commands
– 198 –
◆ Once the maximum threshold is exceeded, utilization must drop beneath the
minimum threshold before the alarm is terminated, and then exceed the
maximum threshold again before another alarm is triggered.
Example
Console(config)#process cpu guard high-watermark 80
Console(config)#process cpu guard low-watermark 60
Console(config)#
Related Commands
“show process cpu guard” on page 198
show process cpu
guard
This command displays the settings for cpu process guard.
Syntax
shpw process cpu guard
Default Setting
Null
Command Mode
Privileged Exec.
Example
Console#show process cpu guard
CPU Guard Configuration
Status : Disabled
High Watermark : 100%
Low Watermark : 20%
Maximum Threshold : 2200pps
Minimum Threshold : 100pps
Trap Status : Enabled
CPU Guard Operation
Current Threshold : 2400pps
Console#
Related Commands
process cpu guard (197)