AS5800-EC Series CLI Reference Guide R02

Chapter 12 | Link Aggregation Commands
MLAG Commands
– 403 –
■
When an MLAG member is operationally down, all updates for learned MAC
addresses on the MLAG peer member will be synced through the peer link
automatically.
Figure 3: MLAG Peer Operation
◆ When the MLAG peer member is down or nonexistent, learned MAC addresses
are synced through the peer link for the MLAG will be removed automatically.
Example
Console(config)#mlag group 1 domain 1 member ethernet 1/1
Console(config)#
show mlag This command shows MLAG configuration settings.
Command Mode
Privileged Exec
Example
Console#show mlag
Global Status : Enabled
Domain List : 1,2
MLAG List : 10,20,30-35,50
Console#
show mlag domain The command shows MLAG domain settings.
Command Mode
Privileged Exec
Syntax
show mlag domain domain-id
domain-id – Domain identifier. (Range: 1-16 characters)