Web Management Guide

Table Of Contents
Chapter 12
| Basic Administration Protocols
Connectivity Fault Management
– 421
Figure 262: Showing Information on Remote MEPs
Displaying Details for
Remote MEPs
Use the Administration > CFM > Show Information (Show Remote MEP Details)
page to show detailed information for MEPs located on other devices which have
been discovered through continuity check messages, or statically configured in the
MEP database and verified through cross-check messages.
Parameters
These parameters are displayed:
MD Index
– Domain index. (Range: 1-65535)
MA Index
– MA identifier. (Range: 1-2147483647)
MEP ID
– Maintenance end point identifier. (Range: 1-8191)
MD Name
– Maintenance domain name.
MA Name
– Maintenance association name.
Level
– Authorized maintenance level for this domain.
MAC Address
– MAC address of this MEP entry.
Primary VLAN
– Service VLAN ID.
Incoming Port
– Port to which this remote MEP is attached.
CC Lifetime
– Length of time to hold messages about this MEP in the CCM
database.
Age of Last CC Message
– Length of time the last CCM message about this
MEP has been in the CCM database.
Frame Loss
– Percentage of transmitted frames lost.
CC Packet Statistics
– The number of CCM packets received successfully and
those with errors.
Port State
– Port states include:
Up – The port is functioning normally.