Web Management Guide

Table Of Contents
Chapter 12
| Basic Administration Protocols
Link Layer Discovery Protocol
– 347
Supported Capabilities
– The supported set of capabilities that define the
primary function(s) of the port:
LLDP-MED Capabilities
Network Policy
Location Identification
Extended Power via MDI – PSE
Extended Power via MDI – PD
Inventory
Current Capabilities
– The set of capabilities that define the primary
function(s) of the port which are currently enabled.
Port Details – Network Policy
8
Application Type
– The primary application(s) defined for this network policy:
Voice
Voice Signaling
Guest Signaling
Guest Voice Signaling
Softphone Voice
Video Conferencing
Streaming Video
Video Signaling
Tagged Flag
– Indicates whether the specified application type is using a
tagged or untagged VLAN.
Layer 2 Priority
– The Layer 2 priority to be used for the specified application
type. This field may specify one of eight priority levels (0-7), where a value of 0
represents use of the default priority.
Unknown Policy Flag
– Indicates that an endpoint device wants to explicitly
advertise that this policy is required by the device, but is currently unknown.
VLAN ID
– The VLAN identifier (VID) for the port as defined in IEEE 802.1Q. A
value of zero indicates that the port is using priority tagged frames, meaning
that only the IEEE 802.1D priority level is significant and the default PVID of the
ingress port is used instead.
DSCP Value
– The DSCP value to be used to provide Diffserv node behavior for
the specified application type. This field may contain one of 64 code point
values (0-63). A value of 0 represents use of the default DSCP value as defined in
RFC 2475.