Datasheet

FeaturesFeaturesFeaturesFeatures
FeaturesFeatures
www.edge-core.com
AS5600-52X-C Datasheet
Hardware Specifications
■ Cost-effective, bare-metal switch infrastructure for data center fabric.
■ 48 x SFP+ switch ports, supporting 10GbE (DAC, 10GBASE-SR/LR/ER/LRM) or 1GbE (1000BASE-T/SX/LX).
■ 4 x 40 QSFP switch ports, supporting 40GbE (DAC, 40GBASE-SR4/LR4) or 4 x 10GbE (DAC or fiber breakout cable).
■ Port Grouping to group 4 x 10G ports into one 40G port at the physical layer for maximum bandwidth utilization, and for 300m
optical reach over MMF.
■ Full line-rate Layer 2 or Layer 3 forwarding of 1.28Tbps
■ Supports hot/cold aisle with port-to-power and power-to-port airflow SKUs.
■ All ports on front; PSUs, fan tray on rear.
■ Hot-swappable, load-sharing, redundant AC PSUs. 48VDC* option.
■ Swappable fan tray with 3:1 fans.
■ Energy Efficiency: 196W typical power consumption.
■ Management: Ethernet and console RJ-45 ports; USB storage port.
Supported Optics and Cables
SFP+ Ports:
10GBASE-CR DAC: 0.5m to 7m; Passive and Active
10GBASE-SRL/SR: up to 100/300m over OM3 MMF
10GBASE-LR: Up to 10km over SMF
10GBASE-ER: Up to 40km over SMF
10GBASE-LRM: Up to 220m over OM1/2/3 MMF
1000BASE-SX, 1000BASE-LX, 100/1000BASE-T
QSFP Ports:
40GBASE-CR4 DAC; 0.5m to 7m; Passive and Active
40GBASE-CR4 DAC to 4 x SFP+ 10GBASE-CR DAC;
0.5m to 7 m
40GBASE-SR4: Up to 100m over OM3 MMF, 150m over
OM4 MMF
40GBASE-SR4 to 4 x 10GBASE-SR: 100m over OM3, 150m
OM4
40GBASE-LR4: Up to 10km over SMF
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC or 48VDC*
Input Voltage: 90 to 264VAC at 50-60Hz. -48 to -72VDC.
Input Current: Max 6A @100/120VAC, 3A @200/240VAC,
10A @-72VDC
PSU Efficiency: Up to 93% for AC PSUs
Max Power: 244W, line-rate, 48 x 10GBASE-SR,
4 x 40GBASE-SR4, AC
Typical Power: 196W, no traffic, 48 x 10G DAC,
4 x 40GBASE-SR4, AC
Regulatory
EMI
CE Mark (EN55022 Class A)
FCC Part 15 Class A
VCCI
Safety
CB, EN 60950
UL/CUL
Environmental:
Temperature: IEC 68-2-14
Drop: ISTA 2A
RoHS-6 Compliant
Warranty
Please check www.edge-core.com for the warranty terms in
your country. The warranty provides return-to-factory hardware
replacement for a three year period in North America.
Ports
Switch Ports:
48 x SFP+ each supporting 10GbE or 1GbE
4 x QSFP each supporting 40GbE or 4 x 10GbE
Management Ports on Front Panel:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage port
Key Components
Switch Silicon: Broadcom BCM56846 Trident+ 640Gbps
CPU: Freescale P2020 dual-core 1.2GHz
Memory: 2GB DDR3 SDRAM ECC
Flash: 8MB NOR Flash, 2GB NAND Flash
Performance
Wire Speed Forwarding: L2 and L3
Switching Capacity: 1.28Tbps
Forwarding Rate: 960Mpps
MAC Addresses: 128K
VLAN IDs: 4K
Jumbo frames (9216Bytes)
L3 Routes IPv4 16K, IPv6 8K
Packet Buffer Size: 9MB shared buffer pool
Latency (RFC2544): 860ns to 1.2us (L2/L3, cut thru, full
line rate)
LEDs
10G SFP+ Port LEDs: Link Speed, Link Status, Activity
40G QSFP Port LEDs: Link Status, Activity
Ethernet Management Port LED: Link Status, Activity
Console Port LED: Link Status
System LEDs: PSU1, PSU2, Diagnostic, Fans, Locator
Physical and Environmental
Dimensions (WxDxH): 438.4 x 473 x 43.4mm (17.26 x 18.62 x
1.71inches)
Weight: 8.5kg (18.74lbs), with two installed power supply modules
Fan Tray: hot-swappable tray with 3+1 redundant fans
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Humidity: 5% to 95% non-condensing
Software
Preloaded with Cumulus Linux. License cost included in the
price for the specific term described in the SKU.
TEL: +886-3-5638888 FAX: +886-3-6686111
No.1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
sales_ec@edge-core.com www.edge-core.com
TEL: +1 (877) 828-CORE(877-828-2673)
20 Mason Irvine, CA 92618