Datasheet

Key Features and Benefits
Cost-effective, bare-metal switch infrastructure for data center fabric.
48 x SFP+ switch ports, supporting 10GbE (DAC, 10GBASE-SR/LR) or 1GbE (1000BASE-T/SX/LX).
■ 6 x 40 QSFP switch ports, each supporting 40GbE (DAC, 40GBASE-SR4/LR4) or 4 x 10GbE (DAC or fiber
breakout cable).
Port grouping of 4 x 10G ports into one 40G port at the physical layer for maximum bandwidth utilization,
and for 300m optical reach over MMF.
Full line-rate Layer 2 or Layer 3 forwarding of 720 Gbps.
Flexible operation mode support: legacy/SDN mode and Hybrid mode
Support VM Switching, VXLAN and NVGRE tunneling support in hardware for network virtualization.
Rack mountable in standard 19" racks. Mountable in 21" Open Rack with the Open Rack Switch Adapter.
Supports hot/cold aisle with port-to-power and power-to-port airflow SKUs.
All ports on front; PSUs, fan tray on rear.
Hot-swappable, load sharing, redundant AC or -48 VDC PSUs. 12 VDC power input option.
Hot swappable 4+1 redundant fans.
Management: Ethernet and console RJ-45 ports; USB storage port.
Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of compatible
independent SwitchOS software.
Compatible with EstiNOS 2.0 and later version from EstiNet Technologies Inc.
CPU and memory subsystem provided on factory-pluggable internal module for flexibility
– AS5512-54X SKUs with Intel™ Atom
®
C2538 x86 processor, to allow switch to run scripts and applications built
with standard Linux tools.
TEL: +886-3-5638888 FAX: +886-3-6686111
No.1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
sales_ec@edge-core.com www.edge-core.com
TEL: +1 (877) 828-CORE (877-828-2673)
20 Mason Irvine, CA 92618
TEL: +886-3-5638888 FAX: +886-3-6686111
No.1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
sales_ec@edge-core.com www.edge-core.com
TEL: +1 (949)-336-6801
20 Mason Irvine, CA 92618
www.edge-core.com
AS5512-54X Product Specifications
Features
Ports
Switch Ports:
48 x SFP+ each supporting 10GbE or 1GbE
6 x QSFP each supporting 40GbE or 4 x 10GbE
Management Ports on Front Panel:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage port
Key Components
Switch Silicon : Nephos Aries MT3257 720Gbps
AS5512-54X: Intel Atom C2538 quad-core 2.4GHz x86 processor
8 GB SODIMM DDR3 RAM with ECC
16 MB SPI Flash
8 GB NAND Flash
Performance
Wire Speed Forwarding: L2 and L3
Switching Capacity: 720 Gbps
Forwarding Rate: 1 Bpps
Jumbo frames support up to 9K Bytes
Packet Buffer Size: 12 MB shared buffer pool
Subject to NOS:
MAC Addresses: 256 K
VLAN IDs: 4 K
L3 Routes: IPv4 maximum 96 K, IPv6 maximum 56 K
LEDs
10G SFP+ Port LEDs: Link Speed, Link Status, Activity
40G QSFP Port LEDs: Link Status, Activity for 40G status
40G QSFP Breakout LEDs: set of 24 LEDs, 4 per QSFP port,
show Link, Status, Activity 10G links with 4x10G breakout
Ethernet Management Port LED: Link Status, Activity
Console Port LED: Link Status
System LEDs: PSU1, PSU2, Diagnostic, Fans, Locator
Supported Optics and Cables
SFP+ Ports:
10GBASE-CR DAC: up to 5 m passive; up to 10 m active
10GBASE-SRL/SR: up to 100/300 m over OM3 MMF
10GBASE-LR: Up to 10 km over SMF 10GBASE-LR
1000BASE-SX, 1000BASE-LX, 100/1000BASE-T
QSFP Ports:
40GBASE-CR4 DAC; 0.5 m to 7 m; Passive and Active
40GBASE-CR4 DAC to 4 x SFP+ 10GBASE-CR DAC; up to 5 m
passive; up to 10 m active
40GBASE-SR4: Up to 100 m over OM3 MMF, 150 m over
OM4 MMF
40GBASE-SR4 to 6 x 10GBASE-SR: 100 m over OM3, 150 m
OM4
40GBASE-LR4: Up to 10 km over SMF
Software
Switch is loaded with Open Network Install Environment (ONIE)
software installer
Compatible with EstiNOS 2.0 and later version from EstiNet
Technologies Inc
Physical and Environmental
Dimensions (WxDxH): 443 x 473 x 43.4 mm (17.4 x 18.6 x 1.71
in)
Weight: 8.5 kg (18.74 lb), with two installed PSU modules
Fans: hot-swappable 4+1 redundant fans
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Humidity: 5% to 95% non-condensing
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC or -48 VDC
Input Voltage: 90 to 264 VAC at 50-60Hz. -48 to -72 VDC.
Input Current: Max 6A @100/120 VAC, 3A @200/240 VAC,
10A @-72 VDC
PSU Efficiency: Up to 93% for AC PSUs
Power input option: 12 VDC
Regulatory
EMI
CE Mark
EN55022 Class A
EN55024
EN61000-3-2
EN61000-3-3
FCC Part 15 Class A
VCCI
Safety
CB
UL/CUL
Environmental:
Temperature: IEC 68-2-14
Vibration: IEC 68-2-36, IEC 68-2-6
Shock: IEC 68-2-29
RoHS-6 Compliant
Acoustic Noise Level: Under 60dB in 40°C
Warranty
Please check www.edge-core.com for the warranty terms in
your country.
For More Information
To find out more about Edgecore Networks Corporation products and
solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing
innovative network solutions. In the service provider network, in the
data center or in the cloud, Edgecore Networks Corporation delivers
the software and systems that transform the way the world connects.
Edgecore Networks Corporation serves customers and partners
worldwide. Additional information can be found at
www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton Technology
Corporation, the leading network ODM company. The Edgecore Data
Center switches are developed and manufactured by Accton.
To purchase Edgecore Networks solutions, please contact your
Edgecore Networks Corporation representatives at +886 3 563 8888
(HQ) or +1 (949)-336-6801 or authorized resellers.
© Copyright 2016 Edgecore Networks Corporation. The information contained herein is subject to
change without notice. This document is for informational purposes only and does not set forth any
warranty, expressed or implied, concerning any equipment, equipment feature, or service offered by
Edgecore Networks Corporation. Edgecore Networks Corporation shall not be liable for technical or
editorial errors or omissions contained herein.
EC-DS-0816-01