Datasheet

Physical and Environmental
■ Dimensions (WxDxH): 44 x 35 x 4.4 cm (17.32 x 13.78 x 1.77”) 1 RU
■ Weight: 6.36 kg (14.02 lb)
■ Fans: System fan and PSU fans
■ Operating Temperature: 0°C to 45°C
■ Storage Temperature: -40°C to 70°C
■ Operating Humidity: 5% to 95% non-condensing
Regulatory
■ EMI:
CE Mark (EN55022 Class A)
FCC Part 15 Class A
VCCI Class A
CCC GB9254-2008
BSMI (CNS13438)
■ Environmental:
Temperature: IEC 68-2-14
Shock: IEC 68-2-29
Vibration: IEC 68-2-36, IEC 68-2-6
Drop: ISTA 2A
■ RoHS-6 Compliant
■ Safety:
UL (CSA 22.2 No 60950-1 & UL 60950-1)
CB (IEC/EN60950-1)
BSMI (CNS14336)
■ Country of Origin: Taiwan (TAA Compliant)
Warranty
Please check www.edge-core.com for the warranty terms in your
country.
For More Information
To find out more about Edgecore Networks Corporation products
and solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing
innovative network solutions. In the service provider network, in the
data center or in the cloud, Edgecore Networks Corporation delivers
the soſtware and systems that transform the way the world
connects. Edgecore Networks Corporation serves customers and
partners worldwide. Additional information can be found at
www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton
Technology Corporation, the leading network ODM company. The
Edgecore data center switches are developed and manufactured by
Accton.
To purchase Edgecore Networks solutions, please contact your
Edgecore Networks Corporation representatives at [phone]
(HQ) or [phone] or authorized resellers.
© Copyright 2021 Edgecore Networks Corporation. The information contained herein
is subject to change without notice. This document is for informational purposes only
and does not set forth any warranty, expressed or implied, concerning any
equipment, equipment feature, or service offered by Edgecore Networks Corporation.
Edgecore Networks Corporation shall not be liable for technical or editorial errors or
omissions contained herein.
Ports
■ Switch Ports:
48 x RJ-45 100/1000BASE-T PoE ports
4 x 10G SFP+ ports supporting 10G or 1G
2 x 20G QSFP+ stacking ports (requires NOS to support
hardware stacking feature)
■ Management Ports:
(1) port-to-power airflow type
1 x Micro USB serial console
1 x RJ-45 100/1000BASE-T management port
1 x Type-A USB storage port
(2) port-to-power airflow v1 type
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management port
1 x Micro-USB storage port
Key Components
■ Switch Silicon: Broadcom BCM56340 Helix4
■ CPU: Dual-core ARM Cortex A9 1 GHz
■ Memory: 2 GB DDR3 SDRAM ECC
■ Flash: 8 MB SPI Flash, 32GB MLC USB
Performance
■ Wire Speed Forwarding: L2 and L3
■ Switching Capacity: 256 Gbps full duplex
■ Forwarding Rate: 190 Mpps
■ MAC Addresses: up to 96 K
■ VLAN IDs: 4K
■ Jumbo Frames: Up to 12 KB
■ L3 Entry: IPv4/IPv6 96 k/48 k Unicast, 48 k/24 k Multicast
■ Packet Buffer Size: 4 MB shared buffer pool
Supported Optics and Cables
■ GE RJ-45 Ports: Cat 5/5e/6 up to 100 m
■ SFP+ Ports:
10GBASE-CR DAC; 0.5 m to 7 m
10GBASE-SRL/SR; up to 100/300 m over OM3 MMF
10GBASE-LR; up to 10 km over SMF
1000BASE-SX, 1000BASE-LX, 100/1000BASE-T
■ QSFP+ Port for stacking
LEDs
■ GE RJ-45 SFP+ Port LEDs: Link Speed, Link Status, Activity
■ 10G SFP+ Port LEDs: Link Speed, Link Status, Activity
■ Ethernet Management Port LED: Link Status, Activity
■ System LEDs: PRI, PSU1, PSU2, STK1, STK2, FAN, PoE
Soſtware
■ Switch is loaded with Open Network Install Environment (ONIE)
soſtware installer
■ Compatible with the following NOS options: open source
options, plus commercial NOS offerings.
Power
■ PSUs: 2 redundant, load-sharing, hot-swappable AC
Note: AC PSUs are redundant in terms of system and
networking, but not fully redundant in terms of PoE functions
and the power budget.
■ Input Voltage: 100-240 VAC, 50-60 Hz, 12-6.5 A or 13-6.5 A
AS4610-54P Enterprise Switch