AS4600-54T_v2015.02.00.05-2015.06.25.00_ReleaseNotes

ENGINEERING RELEASE NOTES – ACCTON COMPANY CONFIDENTIAL
Subject to Change Without Notice
Page: 4 of 6 Accton Confidential
2*
Hid harmless warning: 4600-54T Port LED Diag test result -port ge36 does not support
100 Mbps full duplex.
NOTE:
This solution was wrong. See diagnostics version 1.0.0.1.
3
During install on ONIE, update sys_eeprom variable "0x2E diag version" as version to be
installed.
Ver. 0.0.0.16, 2015/01/21
1*
Add commands to read USB controller firmware and write correct type.
2
Smart partitioning of flash if it is in the wrong partition.
Ver. 0.0.0.15, 2013/12/25
1
fix redundant print message when checking only one PSU.
Ver. 0.0.0.14, 2013/12/18
1
correct the test item for PSU FAN direction
Ver. 0.0.0.12, 2013/11/11
1
initial version
4. sys_eeprom
Ver. 7, 2015/02/26
1
Changed “0x29 ONIE Version” from using the master file to be programmed during
production.
Ver. 6, 2015/01/21
1
Changed 0x2E Diag Version from “not needed to be written during Production Testing” to
“needed to be written during Production Testing depend on needs”.
Ver. 5, 2014/11/19
1
Updated to remove some need for Production Test to write.
2
Added more non-blank default values.
Ver. 4, 2014/10/24
1
Changed 0x29 ONIE version from “2014.08.00.08” to “2014.08.00.10”.
2
Added more default values.
Ver. 3, 2014/09/26
1
Changed 0x29 ONIE version from “2014.08.00.05” to “2014.08.00.08”.
Ver. 2, 2014/09/05
1
Changed 0x28 Platform Name from “powerpc-as4600_54t-r0” to
“powerpc-accton_as4600_54t-r0”.
Ver. 1, 2013/11/04
1
Initial version.