AS4600-54T_v2015.02.00.05-2015.06.25.00_ReleaseNotes

ENGINEERING RELEASE NOTES – ACCTON COMPANY CONFIDENTIAL
Subject to Change Without Notice
Page: 3 of 6 Accton Confidential
Ver. 3.0.1.9, 2014/10/23
1
Updated the default ONIE version number (2014.08.00.10) inside u-boot.
Ver. 3.0.1.8, 2014/09/02
1
Changed the default value of environment variables to be consistent with ONIE v2014.08:
platform=accton_as4600_54t
onie_platform=powerpc-accton_as4600_54t-r0
Ver. 3.0.1.7, 2014/03/20
1
to correct lighting of Diag, PSU, FAN, and Module LEDs
2
fixed "Waiting for D_INIT timeout. Memory may not work" message
Ver. 3.0.1.6, 2014/01/10
1
force LED2 (54616S INIT_L) to high
2
improve coding style
Ver. 3.0.1.5, 2013/12/09
1
auto create "platform" in uboot environment if it does not exist
Ver. 3.0.1.4, 2013/11/27
1
add environment variable "platform" with value as4600_54t
2
update the value of enviroment variable "ver" to flash
3
change the default fan speed to full speed
Ver. 3.0.1.2 2013/11/08
1
Linux kernel with 0x2000 (2KB) uboot environment size will be forced to use size 0x10000
(64KB) when boot up
2
fine tune the speed of accessing external USB to be compatible with more USB disks to
read big files
Ver. 3.0.1.1, 2013/10/17
1
Fixed the second usb start failure problem
Ver. 3.0.0.1, 2013/10/04
1
Initial version
3. Diagnostic
Ver. 1.0.0.1, 2015/03/18
1*
Rolled back: 4600-54T Port LED Diag tesst result -port ge36 does not support 100 Mbps
full duplex.
NOTE:
A wrong solution was implemented in diagnostics version 1.0.0.0 and is now rolled back.
The operator needs to know that the error message for “ge36” is harmless. This item and
the wrong solution are marked as internal issues with “*”.
Ver. 1.0.0.0, 2015/03/04
1
Add commands to read USB controller firmware and write correct type.