AS4600-54T_v2014.08.00.10-2015.02.24.01_EngReleaseNotes

ENGINEERING RELEASE NOTES – ACCTON COMPANY CONFIDENTIAL
Subject to Change Without Notice
Page: 3 of 6 Accton Confidential
3
change the default fan speed to full speed
Ver. 3.0.1.2 2013/11/08
1
Linux kernel with 0x2000 (2KB) uboot environment size will be forced to use size 0x10000
(64KB) when boot up
2
fine tune the speed of accessing external USB to be compatible with more USB disks to
read big files
Ver. 3.0.1.1, 2013/10/17
1
Fixed the second usb start failure problem
Ver. 3.0.0.1, 2013/10/04
3. Diagnostic
Ver. 0.0.0.16, 2015/01/21:
1
Add commands to read USB controller firmware and write correct type.
2
Smart partitioning of flash if it is in the wrong partition.
Ver. 0.0.0.15, 2013/12/25:
1
fix redundant print message when checking only one PSU.
Ver. 0.0.0.14, 2013/12/18:
1
correct the test item for PSU FAN direction
Ver. 0.0.0.12, 2013/11/11:
1
initial version
4. sys_eeprom
Ver. 6, 2015/01/21
1
Changed 0x2E Diag Version from “not needed to be written during Production Testing” to
“needed to be written during Production Testing depend on needs”.
Ver. 5, 2014/11/19
1
Updated to remove some need for Production Test to write.
2
Added more non-blank default values.
Ver. 4, 2014/10/24
1
Changed 0x29 ONIE version from “2014.08.00.08” to “2014.08.00.10”.
2
Added more default values.
Ver. 3, 2014/09/26
1
Changed 0x29 ONIE version from “2014.08.00.05” to “2014.08.00.08”.
Ver. 2, 2014/09/05
1
Changed 0x28 Platform Name from “powerpc-as4600_54t-r0” to
“powerpc-accton_as4600_54t-r0”.