Datasheet

Key Features and Benefits
■ Cost effective, white-box infrastructure.
■ 48 x SFP+ switch ports, supporting 10 GbE (DAC, 10GBASE-SR/LR/ER/ LRM) or 1 GbE (1000Base-T/SX/LX).
■ 4 x 40G QSFP switch ports, supporting 40 GbE (DAC, 40GBASE-SR4/LR4) or 4 x 10 GbE (DAC or fiber breakout cable).
■ Port Grouping to group 4 x 10G ports into 40G port at physical layer for maximum bandwidth utilization, and 300m optical reach
over MMF.
■ Full line-rate Layer 2 or Layer 3 forwarding of 1.28 Tbps
■ Support hot/cold aisle with port-to-power and power-to-port airflow SKUs.
■ All ports on front; PSUs, fan tray on rear.
■ Hot swappable, load sharing, redundant AC or 48VDC* PSUs
■ Swappable fan tray with 3:1 fans.
■ Energy Efficiency. 196W typical power consumption at full line rate forwarding over 48 x 10 GbE DAC and 4 x 40GBASE-SR4,
with AC PSU.
■ Layer 2 Switching: VLANs, COS, LAG.
■ Converged Enhanced Ethernet: DCBX, 802.1Qbb PFC, 802.1Qau QCN, 802.1Qaz ETS, FCOE forwarder.
■ Layer 3 IPv4/IPv6 Switching: 32-way ECMP, OSPFv2, OSPFv3, BGP-4, VRRP. Requires L3 software package.
■ QoS: 802.1p, DiffServ, ACLs, SP/WRR/WFQ scheduling, WRED.
■ Management: Ethernet and console RJ45 ports; USB storage port. Industry standard CLI, SNMPv1/2/3, AAA.
www.edge-core.com
Features
AS5600-52X Product Specifications
Features
TEL: [phone] FAX: [phone]
No.1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
[e-mail] www.edge-core.com
TEL: [phone]-CORE(877-828-2673)
20 Mason Irvine, CA 92618
Ports
Switch Ports:
48 x SFP+ each supporting 10 GbE or 1 GbE
4 x QSFP each supporting 40 GbE or 4 x 10 GbE
Management Ports on front panel:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage port
Performance
Wire Speed Forwarding: L2 and L3
Switching Capacity: 1.28 Tbps
Forwarding Rate: 960 Mpps
MAC Addresses: 128K
VLAN IDs: 4K
Link Aggregation: 8 ports per group: 64 groups per switch
L3 Hosts: 16K
L3 Routes IPv4 16K, IPv6 8K
Packet Buffer Size: 9 MB shared buffer pool
Latency (RFC2544): 860 ns to 1.2 us (L2/L3, cut thru, full line rate)
CPU, Memory, Flash: Dual core 1.0 GHz P2020 CPU, 2 GB, 2 GB
Ethernet and IP Standards
802.3ab 1000BASE-T
802.3ae 10G Ethernet
802.3u 100BASE-T
802.3x Flow Control
802.3z 1000BASE-X
RFC 768 UDP
RFC 791 IP
RFC 792/4443 ICMP/ICMPv6
RFC 793 TCP
Jumbo Frames (9216 Bytes)
L2 Switching Features
Spanning Tree:
802.1D Spanning Tree
802.1s Multiple Spanning Tree
802.1w Rapid Spanning Tree
Per-VLAN Rapid Spanning Tree
Storm Control
802.3ad Link Aggregation
Selectable LAG hashing algorithm
802.1AB LLDP Discovery
ANSI/TIA-1057 LLDP, MED
Virtual LANs:
802.1Q VLAN
Port-based VLAN
802.1v Protocol-based VLAN
802.3ac VLAN Tagging
Q-in-Q
IGMP Snooping v1/v2/v3
RFC 4541 IGMP, MLD Snooping
ISDP
QoS Features
Up to 8 queues per port
IEEE 802.1p COS
DSCP/TOS Classification, Remarking
SP, WRR, WFQ Queuing. WRED
Per port bandwidth mgmt, shaping
DCBX Data Center Bridging
802.1Qau QCN
802.1Qaz ETS
802.1Qbb PFC
ACLs: L2, L3, L4
Supported Optics and Cables
SFP+ Ports:
10GBASE-CR DAC: 0.5 m to 7 m
10GBASE-SRL/SR: up to 100/300 m over OM3 MMF
10GBASE-LR: Up to 10 km over SMF
10GBASE-ER: Up to 40 km over SMF
10GBASE-LRM: Up to 220 m over OM1/2/3 MMF
1000BASE-SX, 1000BASE-LX, 100/1000BASE-T
QSFP Ports:
40GBASE-CR4 DAC: 0.5 m to 7 m
40GBASE-CR4 DAC to 4 x SFP+ 10GBASE-CR DAC: 0.5 to 7 m
40GBASE-SR4: Up to 100 m over OM3 MMF, 150 m over OM4 MMF
40GBASE-SR4 to 4 x10 GBASE-SR: 100 m over OM3, 150 m OM4
40GBASE-LR4: Up to 10 km over SMF
L3 Routing Features (Require L3 Software License)
RFC 826 ARP
RFC 1519 CIDR
RFC 1812 IPv4 Routers
RFC 2711 IPv6 Router Alert
Static Routing
VLAN and Port Based Routing
Route Redistribution
ECMP: 32-way, enhanced hash
RFC 3056: IPv4 to v6 tunnels
RFC 3768 VRRP
OSPF:
RFC 1765 OSPF Database Overflow
RFC 2328 OSPFv2
RFC 2740 OSPFv3
RFC 3101 OSPF NSSA Option
BGP:
RFC 2385 MD5
RFC 2918 Route Refresh
RFC 4271 BGP-4
RFC 4486 BGP Cease Notification
RFC 5492 Capabilities Advertisement
Physical and Environmental
Dimensions (WxDxH): 438.4 x 473 x 43.4 mm (17.26 x 18.62 x 1.71 inches)
Weight: 8.5 kg (18.74 lbs), with two installed power supply modules
Fan Tray: hot-swappable tray with 3+1 redundant fans
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Humidity: 5% to 95% non-condensing
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC or 48VDC*
Input Voltage: 90 to 264VAC at 50-60 Hz. -48 to -72 VDC.
Input Current: Max 6A @100/120 VAC, 3 A @200/240 VAC, 10A @-72VDC
Max Power: 244 W, line-rate, 48 x 10GBASE-SR, 4 x 40GBASE-SR4, AC
Typical Power: 196 W, no traffic, 48 x 10G DAC, 4 x 40GBASE-SR4, AC