Datasheet
Regulatory
■ Safety:
UL (CAN/CSA 22.2 No 60950-1 & UL60950-1)
IEC 62368-1:2014
CB (IEC/EN60950-1)
CCC (GB4943.1-2011)
■ Electromagnetic Compatibility:
CE Mark:
EN 55032 Class A
EN 55024 (Immunity) for Information Technology Equipment
EN 61000-3-3
EN 61000-3-2
FCC Title 47, Part 15, Subpart B Class A
CCC (GB9254-2008)
■ Environmental:
Bump: IEC60068-2-29- packaged
Shock: ETSI EN 300 019-2-3 -Operational Tests, Class T3.2 op
RoHS 2.0 Compliant
WEEE Standards: The switches complied with the following
WEEE standards: Waste Electrical and Electronic Equipment
(WEEE Directive 2002/96/EC)
Warranty
Please check www.edge-core.com for the warranty terms in your
country.
For More Information
To find out more about Edgecore Networks Corporation products
and solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing
innovative network solutions. In the service provider network, in the
data center or in the cloud, Edgecore Networks Corporation delivers
the soſtware and systems that transform the way the world
connects. Edgecore Networks Corporation serves customers and
partners worldwide. Additional information can be found at
www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton
Technology Corporation, the leading network ODM company. The
Edgecore data center switches are developed and manufactured by
Accton.
To purchase Edgecore Networks solutions, please contact your
Edgecore Networks Corporation representatives at +886 3 563 8888
(HQ) or +1 (949)-336-6801 or authorized resellers.
© Copyright 2022 Edgecore Networks Corporation. The information contained herein
is subject to change without notice. This document is for informational purposes only
and does not set forth any warranty, expressed or implied, concerning any
equipment, equipment feature, or service offered by Edgecore Networks Corporation.
Edgecore Networks Corporation shall not be liable for technical or editorial errors or
omissions contained herein.
AGR400 Aggregation Router
Ports
■ Interface:
4 x 10G/25G SFP28
18 x 100G QSFP28
4 x 100G QSFP-DD
4 x 400G QSFP-DD
Supports 1GE, 10G, 40GE and 100GE modes
Supports standard 1GE, 10GE, 25GE, 50GE configurations by
using DAC breakout cables into 2x50GE, 4x25GE, or 4x10GE
■ Supported Transceivers and Cables:
1000BASE-EX/ZX
10GBASE-SR/LR/ER/ZR
100GBASE-SR4/LR4/ER4/ZR4/PSM4-2
• Note: More optics and detailed cabling information can be found at
www.edge-core.com.
■ Management Ports:
1 x RJ-45 serial console port
1 x RJ-45 10/100/1000BASE-T management port
1 x USB2.0 Port
1 x Micro USB console port
■ Timing:
3 x RJ-45 (BITS)
1 x RJ-45 (1PPS)
1 x SMB (1PPS out)
1 x SMB (10MHz input)
Key Componets
■ Switch Silicon: Broadcom Qumran-2C BCM88823
■ CPU Modules:
Intel® D1548 8C
SDRAM DDR4 SO-DIMM 32GB (16 GB x 2)
SPI Boot Flash redundant (2 x 16 MB)
SSD: M.2 128GB
■ BMC: ASPEED AST2600
Performance
■ Capacity: 2.4 Tb/s full duplex
Physical and Environmental
■ Dimensions (WxDxH): 440 mm x 480 mm x 87 mm (2RU)
■ Weight: 16 Kg with PSUs and fans
■ Fans: Hot-swappable 4+1 redundant fans
■ Operating Temperature/Humidity:
0°C to 45°C (32°F ~ 113°F)/5% to 85%
Power
■ 1 + 1 redundant and hot-swappable PSUs
■ 48 VDC Power Supply:
36-72 VDC input
Front-to-back airflow
Supports load-sharing function
■ AC Power Supply:
90-240 VAC input
Front-to-back airflow
Supports load-sharing function
■ Maximum PSU Capacity: 1300 W
■ Power Consumption:
527 W@25°C
684 W@45°C
(Test performed fully loaded with eLoads, which uses more
power than real transceivers.)