Datasheet
Power
■ PSUs: 2 redundant, load-sharing, hot-swappable AC or -48 VDC
■ AC input range: 90 V ~ 240 VAC
■ DC input range: -36 ~ -72 VDC
■ AC 110V
Minimum: 232 W
Maximum: 327 W
■ AC 220V
Minimum: 231 W
Maximum: 337 W
■ DC 48V
Minimum: 229 W
Maximum: 349 W
Regulatory Compliance
■
Safety Compatibility
CB
UL/CUL
■ EMI
CE Mark
EN55032 Class A
EN55024
EN61000-3-2
EN61000-3-3
FCC Part 15 Subpart B Class A
VCCI Class A
BSMI
■ Environmental Compliance
NEBS Level 1
■ RoHS 2.0 Compliant
■ WEEE Standards: The switches complied with the following WEEE
standards: Waste Electrical and Electronic Equipment (WEEE Directive
2002/96/EC)
Warranty
Please check www.edge-core.com for the warranty terms in your country.
For More Information
To find out more about Edgecore Networks Corporation products and
solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing innovative
network solutions. In the service provider network, in the data center or in
the cloud, Edgecore Networks Corporation delivers the soſtware and
systems that transform the way the world connects. Edgecore Networks
Corporation serves customers and partners worldwide. Additional
information can be found at www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton Technology
Corporation, the leading network ODM company. The Edgecore data center
switches are developed and manufactured by Accton.
To purchase Edgecore Networks solutions, please contact your Edgecore
Networks Corporation representatives at +886 3 563 8888 (HQ) or +1
(949)-336-6801 or authorized resellers.
© Copyright 2022 Edgecore Networks Corporation. The information contained herein is subject to
change without notice. This document is for informational purposes only and does not set forth
any warranty, expressed or implied, concerning any equipment, equipment feature, or service
offered by Edgecore Networks Corporation. Edgecore Networks Corporation shall not be liable for
technical or editorial errors or omissions contained herein.
Ports
■ Switch Ports:
48 x SFP+ each supporting 10 GbE or 1 GbE
6 x 100G QSFP28 each supporting 1 x 40/100 GbE
■ Management Ports on Front Panel:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management port
1 x USB Type A storage port
Key Components
■ Switch Silicon:
Broadcom Qumran MX BCM88370
■ CPU module:
Processor: Intel Atom® C2538 4C 2.4GHz Processor
Memory: DDR3 SO-DIMM 8 GB x 2
mSATA: 32 GB
Performance
■ Switching Capability: 800 Gbps
■ Forwarding Rate: 720 Mpps
■ Jumbo Frame: 9 Kbytes
■ 16MB on-chip buffering
■ Deep DRAM buffering: 6 GB
■ MAC Table (LEM): 750 k
Supported Optics and Cables
■ SFP+ Ports:
10GBASE-CR DAC: up to 3 m passive; up to 10 m active
10GBASE-SRL/SR: up to 100/300 m over OM3 MMF
10GBASE-LR: Up to 10 km over SMF
10GBASE-ER: Up to 40 km over SMF
1000BASE-SX, 1000BASE-LX, 100/1000BASE-T
■ QSFP+ Ports:
40GBASE-CR4 DAC; up to 3 m passive; up to 10 m active
40GBASE-CR4 DAC to 4 x SFP+ 10GBASE-CR DAC; up to 3 m passive;
up to 10 m active
40GBASE-SR4: Up to 100 m over OM3 MMF, 150 m over OM4 MMF
40GBASE-LR4: Up to 10 km over SMF
100GBASE-SR4: 100 Gbps short reach transceiver
100GBASE-LR4: 100 Gbps long reach transceiver
QSFP28 AOC Cable: 100 Gbps to 100 Gbps AOC cable with upto 30 M 100G
QSFP28 DAC Cable: 100GBASE-CR4 100 Gbps to 100Gbps Twinax
DAC Cable
Physical and Environmental
■ Dimensions (WxDxH): 440 x 548 x 44 mm (17.32 x 21.57 x 1.73 in)
■ Weight: 9.34 kg (20.59 lb), with two installed PSU modules
■ Fans: hot-swappable 5+1 redundant fans
■ Operating Temperature: 0°C to 40°C (32°F to 104°F)
■ Storage Temperature: -40°C to 70°C (-40°F to 158°F)
■ Operating Humidity: 5% to 95% non-condensing
Soſtware
■ Switch is loaded with Open Network Install Environment (ONIE)
soſtware installer
■ Compatible with the following NOS options: Open Network Linux (ONL)
AGR100 Aggregation Router