(AS5912-54X) Quick Start Guide-R02

Connect DAC cables to the SFP+/QSFP28 slots. Or first install
SFP+/QSFP28 transceivers and then connect fiber optic
cabling to the transceiver ports.
The following transceivers are supported:
◆
100GBASE-CR4, AOC, SR4, LR4, and PSM4
◆
40GBASE-CR4, SR4, and LR4
◆
25GBASE-CR4 and AOC (except 5916-54XM)
◆
10GBASE-CR, SR, and LR
As connections are made, check the port status LEDs to be
sure the links are valid.
For the SFP+ ports:
◆
Green — 10 Gbps mode
◆
Amber — 1 Gbps mode
Each QSFP28 port has four LEDs that indicate valid links in
the following modes:
◆
1 LED Green — 100 Gbps mode
◆
1 LED Blue — 40 Gbps mode
◆
1-4 LEDs Amber — 25 Gbps breakout mode (four lanes)
◆
1-4 LEDs Purple — 10 Gbps breakout mode (four lanes)
2
3
Hardware Specifications
Switch Chassis
Size (WxDxH) 438.4 x 609 x 43.25 mm (17.26 x 23.97 x 1.70 inch)
Weight AS5912-54X:
9.7 kg (21.38 lb), with two installed PSUs
5916-54XM:
10.65 kg (23.47 lb), with two installed PSUs
Temperature Operating: 0° C to 40° C (32° F to 104° F)
Storage: -40° C to 70° C (-40° F to 158° F)
Humidity Operating: 5% to 95% (non-condensing)
Power
Consumption
360 Watts maximum (AS5912-54X)
500 Watts maximum (5916-54XM)
AC PSU
Power Rating 100–240 VAC, 50-60 Hz, 650 Watts
AC Input 100–240 VAC, 50-60 Hz, 5 A maximum
DC Output 5 VDC @ 4 A, 12 VDC @ 52.9 A
48 VDC PSU
Power Rating 48 VDC, 650 Watts
DC Input AS5912-54X: 36–75 VDC, 12 A maximum
5916-54XM: -36 ~ -72 VDC, 16 A maximum
DC Output 5 VDC @ 4 A, 12 VDC @ 52.9 A
Regulatory Compliances
Emissions EN 55032:2015+AC:2016, Class A
EN 61000-3-2:2014, Class A
EN 61000-3-3:2013
FCC Class A
VCCI Class A
CE Mark
CCC GB 9254-2008, Class A
BSMI Class A, CNS 13438
Immunity EN 55024:2010+A1:2015
IEC 61000-4-2/3/4/5/6/8/11
Safety UL (CSA 22.2 No 60950-1 & UL60950-1)
CB (IEC/EN60950-1)
CCC GB 4943.1-2011, Class A
BSMI Class A, CNS 14336-1
Taiwan RoHS CNS 15663
Quick Start Guide
– English 3 –