User's Manual
Table Of Contents
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- System Configuration
- Device Information
- WLAN Configuration
- LAN Settings
- WAN Settings
- Services
- Advanced
- Diagnostics
- Administration Settings
- Appendices
- Troubleshooting
- Cables and Pinouts
- Glossary
- Index
C
HAPTER
8
| Services
NAT/NAPT Settings
– 99 –
NAT EXCLUDE IP You can use the Exclude IP feature to block an IP address or range of IP
addresses from accessing WAN interfaces.
Figure 51: NAT — Exclude IP
The following items are displayed on this page:
◆ Interface – Select the WAN interface for the Exclude IP service.
◆ IP Range – Specifies an IP address range to block on the WAN
interface.
NAT FORWARDING Forwarding allows an external user to reach a private IP address (inside a
LAN) from the outside through a NAT-enabled router.
Figure 52: NAT Forwarding Settings
The following items are displayed on this page:
◆ Local IP Address — Specifies the IP address of a computer on the
local network.