User's Manual
Table Of Contents
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- System Configuration
- Device Information
- WLAN Configuration
- LAN Settings
- WAN Settings
- Services
- Advanced
- Diagnostics
- Administration Settings
- Appendices
- Troubleshooting
- Cables and Pinouts
- Glossary
- Index
C
HAPTER
6
| LAN Settings
LAN Interface
– 73 –
LAN INTERFACE
By default, the ADSL Router is configured with the IP address 192.168.2.1,
subnet mask 255.255.255.0 and a default gateway of 192.168.2.1.
Figure 34: LAN Configuration
The following items are displayed on this page:
◆ Interface Name — Displays the name assigned to the interface.
◆ IP Address — Specifies an IP address for management of the ADSL
Router. Valid IP addresses consist of four decimal numbers, 0 to 255,
separated by periods. (Default: 192.168.2.1.)
◆ Subnet Mask — Indicates the local subnet mask.
(Default: 255.255.255.0)
◆ Secondary IP Address — Specifies a secondary IP address for
management of the unit.
◆ IGMP Snooping — Enables Internet Group Management Protocol
(IGMP) multicast filtering.