User's Manual
Table Of Contents
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- System Configuration
- Device Information
- WLAN Configuration
- LAN Settings
- WAN Settings
- Services
- Advanced
- Diagnostics
- Administration Settings
- Appendices
- Troubleshooting
- Cables and Pinouts
- Glossary
- Index
C
HAPTER
5
| WLAN Configuration
Wireless Security Setup
– 61 –
The following items are displayed on this page:
◆ Set WEP Key — Configures the WEP key setup. This is displayed in the
screen below.
◆ Use 802.1x Authentication — Enables/disables 802.1x
authentication. When enabled the above screen displays.
◆ WEP 64bits/128bits — Selects between 64 bit and 128 bit keys.
RADIUS SERVER
◆ Port — Specifies the port number used to communicate with the
RADIUS server.
◆ IP Address — Specifies the IP address used to communicate with the
RADIUS server.
◆ Password — Specifies the key necessary for RADIUS server
authentication.
WEP KEY SETUP
The following page describes the WEP key setup.
Figure 25: Wireless Security Setup - WEP Key Setup
The following items are displayed on this page:
◆ SSID Type — Selects the VAP to configure the WEP security settings
to.