User's Manual
Table Of Contents
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- System Configuration
- Device Information
- WLAN Configuration
- LAN Settings
- WAN Settings
- Services
- Advanced
- Diagnostics
- Administration Settings
- Appendices
- Troubleshooting
- Cables and Pinouts
- Glossary
- Index
C
HAPTER
4
| Device Information
WAN Status
– 48 –
WAN STATUS
The ADSL Router WAN window displays basic IPv4 and IPv6 WAN port
settings.
Figure 15: Status - WAN
The following items are displayed on this page:
◆ Interface — Displays the interface identifier.
◆ VPI/VCI — Displays the ATM channel identifiers.
◆ Encapsulation — Displays the encapsulation type chosen, either LLC
to VX-Mux.
◆ Default Route — Dipslays if a default route has been enabled.
◆ Protocol — Displays the protocol used for transmission of data packets
◆ IP Address — Displays the local IP address of the WAN port.
◆ Default Gateway — Displays the network route, or gateway used by
the unit when no other known route exists for a given IP packet's
destination address.
◆ Status — Specifies the status of the interface.
◆ DNS Servers — Specifies the IP addresses of DNS servers.