Advanced Display Systems LCD Monitor User Manual Model:W193/W223/W243/W243h Note: The W243h with adjustable stand. The display comes with a three years on site warranty. To activate your warranty please register your display at www.edge10.
INTRODUCTION Thank y ou for purchasing this LCD monitor produced by our company . This monitor uses a TFT (thin film transistor) liquid cry stal display (LCD) panel, and it’s designed with high quality and highly efficient production technology to provide a more professional and consistent image quality to the user. Besides, this TFT LCD monitor is designed to save space and to offer different display positions, comply ing with the living space of modern age.
Precautions Please read the following instructions carefully first to prevent unnecessary hazards. This manual should be retained for future reference. 0 Before you clean or move this monitor, make sure it is power off and the AC power cord is unplugged, so as to avoid accidental injury to the monitor or human body. 0 0 0 Please keep the radiator at the back of the monitor unobstructed. Keep the monitor away from any liquid. Some of the components and parts carry high voltage.
¾ Installation of the Monitor Please switch off the power supply to the computer and its peripheral equipments first. 1. 2. 3. Co n n e c t th e p o w e r c o r d to th e A C p o w e r in p u t s o c k e t a t th e b a c k o f th e u n it, a n d c o n n e c t th e o th e r e n d to th e A C p o w e r s o c k e t.
OSD (On-Screen Display) Adjustment Control Step 1: Press “menu” to activate the OSD on-screen display menu. Step 2: Press “ ▼”or“▲” k e y t o m o v e t h e c u r s o r t o s e l e c t t h e f u n c t i o n . Step 3: Press “source” to open the input source OSD menu Step 4: Press “+”o r “-”k e y t o m o v e t h e c u r s o r t o adjust the volume. Quick Menu Functions . You can press “ ▼”or“▲” to adjust Bright Contrast To adjust the brightness and contrast of the background.
Secondary Menu Settings To adjust the brightness and contrast of the background. Bright Contrast Function Description Press “+”o r “-” key to adjust the numerical level of brightness (0~100). Press “menu” key to save and menu key return to the previous page. Press“+”o r “-” key to adjust the numerical value of contrast (0-100). Press “menu” key to save and menu key return to the previous page.
Back to the previous menu. To adjust the volume of the speakers. Volume Function Description P r e s s “+”o r “-” k e y t o a d j u s t t h e v o l u m e , a n d p r e s s “ m e n u ” k e y t o save and return to the previous page. Press “menu” key to turn the speaker on or off.
Back to the previous page. P r e s s “ ▼”or“▲” k e y t o c h o o s e t h e f u n c t i o n , a n d p r e s s “ m e n u ” k e y to make adjustment. Color Press “ ▼”or“▲” key to select a function, and press “menu” key to enter the adjustment menu. After the adjustment is finished, press “menu” key to save and “source” key exit. Image Config Function Description Press the “menu” key to adjust H/V positions, clock and phase automatically.
P r e s s “+”o r “-” k e y t o m o v e t h e s c r e e n u p o r d o w n . Back to the previous menu. P r e s s “ ▼”or “▲” key to select a function, and press “menu” to adjust. After the adjustment is done, press “menu” key to save and “source” key to return to the previous page. OSD menu Function Description Press “+”or “-” key to move the OSD display position to the right or the left of the screen. P r e s s “+”or “-” k e y to move the OSD display position up or down the screen.
Sets the system to factory default value. Back to the previous page. Press“▲”or“▼”key to select the signal source option （D-SUB or DVI） VGA/DVI Press “▲”or“▼” k e y t o s e l e c t a l a n g u a g e o f O S D m e n u , a n d p r e s s “ menu” key to confirm. Language To quit from the OSD Menu. Exit Power Saving Mode This monitor meets the criteria of NUTEK/TCO and VESA DPMS mode for display power management.
Display Mode Support 19” Series Support 01~28 Mode 22” Series Support 01~31 Mode 24” Series Support 01~32 Mode 10 No. Description H-Freq. (KHz) V-Freq. (Hz) 1 VESA 640×400 31.480 60 2 VESA 640×480 31.649 70 3 VESA 640×480 37.862 72 4 VESA 640×480 37.500 5 VESA 800×600 60 6 VESA 800×600 70 7 VESA 800×600 48.077 72 8 VESA 800×600 46.875 75 9 VESA 1024×768 48.363 60 10 VESA 1024×768 56.476 70 11 VESA 1024×768 56.476 72 12 VESA 1024×768 60.
Preliminary Troubleshooting If the monitor does not run normally, please use the following table to resolve the most common and possible causes of the problem before you call the service personal. If the problems still can't be solved, please contact the local dealer for assistance. Symptom 1. No Display on 2. Screen 3. 1. Fuzzy image. 2. 1. No sound from 2. the speakers. Correct Action Check the connection of the VGA or DVI Signal Cable.
19” Specifications Panel 19” TFT LCD Panel Resolution 1440 x 900 (WXGA+) Display Area ( H x V ) 408.24 mm x 255.15 mm Pixel Pitch 0.2835 mm (Horizontal) x 0.2835 mm (Vertical) View Angle 160º Vertical / 160º Horizontal Input Signals Analog RGB: 0.7 Vp-p Sync: 5V (pos./net. Separate) Color Display 16.
22” Specifications Panel 22” TFT LCD Panel Resolution 1680 x 1050 (WSXGA+) Display Area ( H x V ) 473.76 mm x 296.1 mm Pixel Pitch 0.282 mm (Horizontal) x 0.282 mm (Vertical) View Angle 160º Vertical / 170º Horizontal Input Signals Analog RGB: 0.7 Vp-p Sync: 5V (pos./net. Separate) Color Display 16.
24” Specifications Panel 24” TFT LCD Panel Resolution 1920 x 1200 (WUXGA) Display Area ( H x V ) 518.4 mm x 324 mm Pixel Pitch 0.270 mm (Horizontal) x 0.270 mm (Vertical) View Angle 160º Vertical / 170º Horizontal Input Signals Analog RGB: 0.7 Vp-p Sync: 5V (pos./net. Separate) Color Display 16.
15
