User manual

1.0 Instructions for Federal Communications Commission (FCC)
Compliance
This d
to
for
by
the
op
int
cas
pre
ate the reception antenna of the equipment
quipment
ent into sockets
—— d technician familiar with wireless networking
In o to satisfy the limitations regarding electromagnetic emissions and to
acc
wit
.0 CE Statement
evice has passed the tests stipulated by Article 15 of FCC Compliance and conforms
the limitations and provisions for Class-B digital equipment. The restrictions are
mulated to prevent the harmful interference with radio frequencies produced by or used
household appliances. This unit will emit electromagnetic waves during operation and
refore, it may interfere with the radio-frequency signal if it is not configured and
erated as directed in the user manual. It is not guaranteed that this device will not cause
erference with specific equipment--in particular when it is being powered on or off. In
e this device interferes with TV sets or wireless networking equipment, the user may
vent the interference by using one or several of the methods stated below:
——Reloc
——Increase the distance between this device and the e
——Connect the power plug of this device and that of the equipm
for different lines
Contact an experience
equipment or TV sets
rder
prevent interference with TV sets and/or wireless networking equipment nearby, the
essories provided with this unit should be used. This device should not be modified
hout the authorization or confirmation of the manufacturer.
2