User`s guide

Notices
© Agilent Technologies, Inc.
2009-2011
No part of this manual may be
reproduced in any form or by
any means (including elec
-
tronic storage and retrieval or
translation into a foreign lan
-
guage) without prior agree-
ment and written consent
from Agilent Technologies,
Inc. as governed by United
States and international copy
-
right laws.
Manual Part Number
N2791-97002, Feb 2011
Print History
N2791-97002, Feb 2011
N2791-97001, Nov 2009
N2791-97000, May 2009
Agilent Technologies, Inc.
1900 Garden of the Gods Road 
Colorado Springs, CO 80907
USA
Restricted Rights Legend
If software is for use in the
performance of a U.S. Govern-
ment prime contract or sub-
contract, Software is
delivered and licensed as
“Commercial computer soft
-
ware” as defined in DFAR
252.227-7014 (June 1995), or as
a “commercial item” as
defined in FAR 2.101(a) or as
“Restricted computer soft
-
ware” as defined in FAR
52.227-19 (June 1987) or any
equivalent agency regulation
or contract clause. Use, dupli
-
cation or disclosure of Soft-
ware is subject to Agilent
Technologies’ standard com
-
mercial license terms, and
non-DOD Departments and
Agencies of the U.S. Govern
-
ment will receive no greater
than Restricted Rights as
defined in FAR 52.227-19(c)(1-
2) (June 1987). U.S. Govern
-
ment users will receive no
greater than Limited Rights as
defined in FAR 52.227-14
(June 1987) or DFAR 252.227-
7015 (b)(2) (November 1995),
as applicable in any techni
-
cal data.
Document Warranty
The material contained in
this document is provided
“as is,” and is subject to
being changed, without
notice, in future editions.
Further, to the maximum
extent permitted by appli
-
cable law, Agilent dis-
claims all warranties,
either express or implied,
with regard to this man
-
ual and any information
contained herein, includ
-
ing but not limited to the
implied warranties of
merchantability and fit-
ness for a particular pur-
pose. Agilent shall not be
liable for errors or for
incidental or consequen
-
tial damages in connec-
tion with the furnishing,
use, or performance of
this document or of any
information contained
herein. Should Agilent
and the user have a sepa
-
rate written agreement
with warranty terms cov
-
ering the material in this
document that conflict
with these terms, the war
-
ranty terms in the sepa-
rate agreement shall
control.
Technology Licenses
The hardware and/or soft-
ware described in this docu-
ment are furnished under a
license and may be used or
copied only in accordance
with the terms of such
license.
WARNING
A WARNING notice
denotes a hazard. It
calls attention to an
operating procedure,
practice, or the like
that, if not correctly
performed or adhered
to, could result in
personal injury or
death. Do not proceed
beyond a WARNING
notice until the
indicated conditions
are fully understood
and met.
CAUTION
A CAUTION notice
denotes a hazard. It
calls attention to an
operating procedure,
practice, or the like
that, if not correctly
performed or adhered
to, could result in
damage to the product
or loss of important
data. Do not proceed
beyond a CAUTION
notice until the
indicated conditions
are fully understood
and met.