Operating instructions

Cleaning
Gently wipe the screen with a clean camel hair lens brush, or a soft, clean,
lint-free cloth.
This removes dust and other particles that can scratch the screen,
Do not apply pressure to the screen surface when wiping it clean.
Do not pour or spray any liquid directly onto the screen or case of the
LCD monitor.
Chemical cleaners have been reported to damage the screen or the LCD
monitor.
Read all these instructions and save them for later use.
Follow all warning and instructions on the product.
Product
Do not block the vent holes in the case.
Do not insert sharp objects or spill liquid into the LCD monitor through
cabinet slots.
It may cause accidental fire, electric shock or failure.
Disconnect the power plug from the AC outlet if you
for an indefinite period of time.
Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks.
Do not touch the screen directly with your fingers. You may damage
the screen, and the oil from your skin is difficult to remove.
Do not apply pressure to screen. The LCD is very delicate.
Power
Use the type of power indicated on the marking label.
Plugs
,
Do not remove any of the prongs of the monitor s three-pronged power
plug.
Disconnect the power plug from the AC outlet under following
conditions:
If you for an indefinite period time.
When the power cord or plug is damaged or frayed.
If the product does not operate normally when the operating instructions
are followed.
Precautions
2
are not using it
are not using it