User`s manual

3
● Disconnect the power plug from the AC outlet if you are not using it for an indefinite period of
time.
● Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage points or other risks.
● Do not touch the screen directly with your fingers. You may damage the screen, and the grease
from your skin is difficult to remove.
● Do not apply pressure to screen. The LCD is very delicate.
Power
● Use the type of power indicated on the rating label.
Plug
● Do not remove any of the prongs of the monitor s
,
three-pronged power plug.
● Disconnect the power plug from the AC outlet under following conditions:
● If you are not using it for an indefinite period time.
● When the power cord or plug is damaged or frayed.
● If the product does not operate normally when the operating instructions are followed.
● If the product has been dropped or the cabinet has been damaged.
● If the product exhibits a distinct change in performance, indicating need for service.
Power and extension cord
● Do not allow anything to rest on the power cord.
● Do not locate this product where persons will walk on the cord.
● Use the proper power cord with correct attachment plug type. If the power source is 120V AC,
use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply,
use the tandem (T blade) type attachment plug with ground conductor power cord that meets
the respective European country s safety regulations, such as VDE for Germany.
● Do not overload wall outlets or power cords. Ensure that the total of all units plugged into the
wall outlet does not exceed 10 amperes.
● Ensure that the total ampere ratings on all units plugged into the extension
cord is not above the cord s rating.
● If the power supply cord, which came with your monitor, is to be connected to the PC instead of
the wall outlet, this equipment is to be used with UL/TUV approved computers with receptacle
rated 100~240VAC,50/60Hz,
1.0A(minimum).
Environment
● Place the monitor on a flat and level surface.
● Place the monitor in a well-ventilated place.
●Keep the monitor away from:
Overly hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment
that generates strong magnetic field.