Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Status 3 : STP enabled for MSTP
DGS-3400:4#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status : Enabled
STP Version : MSTP
Max Age : 20
Forward Delay : 15
Max Hops : 20
TX Hold Count : 3
Forwarding BPDU : Enabled
Loopback Detection : Enabled
LBD Recover Time : 60
DGS-3400:4#
show stp ports
Purpose Used to display the Switch’s current STP port configuration.
Syntax
show stp ports <portlist>
Description This command displays the STP port settings and STP port Operational
Status currently implemented on the Switch.
Parameters
<portlist> − Specifies a range of ports to be configured. The port list is
specified by listing the lowest switch number and the beginning port
number on that switch, separated by a colon. Then the highest switch
number, and the highest port number of the range (also separated by a
colon) are specified. The beginning and end of the port list range are
separated by a dash. For example, 1:3 specifies switch number 1, port
3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port 4 − in numerical order. Non-
contiguous portlist entries are separated by a comma. (ex: 1:1-1:3,1:7-
1:9)
Restrictions None
Example usage:
To show STP ports:
DGS-3400:4#show stp ports 1:1-1:9
Command: show stp ports 1:1-1:9
MSTP Port Information
----------------------
Port Index : 1:1 , Hello Time: 2 /2 , Port STP Enabled , LBD : No
External PathCost : Auto/200000 , Edge Port : No /No , P2P : Auto /Yes
Port Forward BPDU : Enabled
MSTI Designated Bridge Internal PathCost Prio Status Role
----- ------------------ ----------------- ---- ---------- ----------
0 8000/0050BA7120D6 200000 128 Forwarding Root
1 8001/0053131A3324 200000 128 Forwarding Master
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
84