Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Example usage:
To delete STP instance ID 2 from the Switch.
DGS-3400:4#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DGS-3400:4#
config stp priority
Purpose Used to update the STP instance configuration
Syntax
config stp priority <value 0-61440> instance_id <value 0-15>
Description This command is used to update the STP instance configuration settings
on the Switch. The MSTP will utilize the priority in selecting the root bridge,
root port and designated port. Assigning higher priorities to STP regions
will instruct the Switch to give precedence to the selected instance_id for
forwarding packets. The lower the priority value set, the higher the priority.
Parameters priority <value 0-61440> - Select a value between 0 and 61440 to specify
the priority for a specified instance id for forwarding packets. The lower the
value, the higher the priority. This entry must be divisible by 4096.
instance_id <value 0-15> - Enter the value corresponding to the previously
configured instance id of which the user wishes to set the priority value. An
instance id of 0 denotes the default instance_id (CIST) internally set on the
Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To set the priority value for instance_id 2 as 4096:
DGS-3400:4#config stp priority 4096 instance_id 2
Command : config stp priority 4096 instance_id 2
Success.
DGS-3400:4#
config stp mst_config_id
Purpose Used to update the MSTP configuration identification.
Syntax
config stp mst_config_id {revision_level <int 0-65535> | name
<string>}
Description This command will uniquely identify the MSTP configuration currently
configured on the Switch. Information entered here will be attached to
BPDU packets as an identifier for the MSTP region to which it belongs.
Switches having the same revision_level and name will be considered
as part of the same MSTP region.
Parameters revision_level <int 0-65535>– Enter a number between 0 and 65535 to
identify the MSTP region. This value, along with the name will identify
the MSTP region configured on the Switch. The default setting is 0.
name <string> - Enter an alphanumeric string of up to 32 characters to
uniquely identify the MSTP region on the Switch. This name, along with
the revision_level value will identify the MSTP region configured on the
Switch. If no name is entered, the default name will be the MAC address
of the device.
81