Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#config firmware unit 1 image_id 1 boot_up
Command: config firmware unit 1 image_id 1 boot_up
Success.
DGS-3400:4#
show firmware information
Purpose Used to display the firmware section information.
Syntax
show firmware information
Description This command is used to display the firmware section information.
Parameters None.
Restrictions None
Example usage:
To display the current firmware information on the Switch:
DGS-3400:4#show firmware information
Command: show firmware information
Box ID ID Version Size(B) Update Time From User
--- -- --------- ------- ------------------- ------------------ ---------------
1 *1 2.00-B46 2013171 0 days 00:00:00 Serial Port(Prom) Unknown
1 2 1.00-B30 2013334 2005/12/12 11:50:15 10.41.44.44(W)
2 *1 2.00-B46 2013171 0 days 00:00:00 Serial Port(Prom) Unknown
2 (empty)
'*' means boot up firmware
(R) means firmware update thru Serial Port(RS232)
(T) means firmware update thru TELNET
(S) means firmware update thru SNMP
(W) means firmware update thru WEB
(SIM) means firmware update thru Single IP Management
DGS-3400:4#
52