Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#config snmp system_contact MIS Department II
Command: config snmp system_contact MIS Department II
Success.
DGS-3400:4#
config snmp system_location
Purpose Used to enter a description of the location of the Switch.
Syntax
config snmp system_location <sw_location>
Description The config snmp system_location command is used to enter a
description of the location of the Switch. A maximum of 255
characters can be used.
Parameters <sw_location> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no location desired.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the Switch location for “ HQ 5F ”:
DGS-3400:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DGS-3400:4#
config snmp system_name
Purpose Used to configure the name for the Switch.
Syntax
config snmp system_name <sw_name>
Description The config snmp system_name command configures the name of
the Switch.
Parameters <sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the Switch name for “
DGS-3400 Switch ”:
DGS-3400:4#config snmp system_name DGS-3400 Switch
Command: config snmp system_name DGS-3400 Switch
Success.
DGS-3400:4#
47