Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#enable snmp traps
Success.
DGS-3400:4#
enable snmp authenticate traps
Purpose
Syntax
Command: enable snmp traps
Used to enable SNMP authentication trap support.
enable snmp authenticate traps
Description This command is used to enable SNMP authentication trap support on the
Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To turn on SNMP authentication trap support:
DGS-3400:4#enable snmp authenticate traps
Command: enable snmp authenticate traps
Success.
DGS-3400:4#
show snmp traps
Purpose Used to show SNMP trap support on the Switch .
Syntax
show snmp traps
Description
Parameters None.
Restrictions Only administrator-level users can issue this command.
This command is used to view the SNMP trap support status
currently configured on the Switch.
Example usage:
To view the current SNMP trap support:
DGS-3400:4#show snmp traps
Command: show snmp traps
SNMP Traps : Enabled
Authenticate Traps : Enabled
DGS-3400:4#
45