Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
39
COMMAND HISTORY LIST
The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
?
config command_history <value 1-40>
show command_history
Each command is listed, in detail, in the following sections.
?
Used to display all commands in the Command Line Interface (CLI).
? {<command>}
This command will display all of the commands available through the
Command Line Interface (CLI).
Parameters {<command>} – Entering the question mark with an appropriate
command will list all the corresponding parameters for the specified
command, along with a brief description of the commands function and
similar commands having the same words in the command.
Restrictions None.
Purpose
Syntax
Description
Example usage:
To display all of the commands in the CLI:
DGS-3400:4#?
..
?
clear
clear arptable
clear attack_log
clear counters
clear log
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_parameter ports
config 802.1x init
config account
config admin local_enable
clear fdb
clear port_security_entry port
config 802.1x auth_mode
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x reauth
config access_profile profile_id
config address_binding ip_mac ipaddress
config address_binding ip_mac ports
config arpentry
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
280