Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
show poe system
switch power limit, consumption, remaining useable power and the
power disconnection method.
Parameters units <unitlist> - Select the switch in the switch stack for which to
show the PoE system settings. This unit number is based on the unit
ID assigned to switches in the switch stack. The DGS-3426P is
currently the only switch in this series with PoE capabilities.
Restrictions None.
Example usage:
To display the power settings for the switch system:
DGS-3400:4#show poe system
Command: show poe system
Unit 1 PoE System Information
---------------------------------------------------
Power Limit : 300 (watts)
Power Consumption : 0 (watts)
Power Remained : 300 (watts)
Power Disconnection Method : deny next port
If Power Disconnection Method is set to deny next port, then the system cannot utilize its
maximum power capacity. The maximum unused watt is 19W.
DGS-3400:4#
279